HPE MSA 2050 SAS Dual Controller LFF Storage (Q1J28A)

Gọi để biết giá (giá chưa bao gồm VAT)

Capacity: 1152 TB LFF maximum raw capacity
Drive description: 12 LFF SAS/MDL SAS/SSD supported
Host interface: One 12 Gb SAS 4-ports per controller is included
Storage controller: 2 HPE MSA 2050 SAS Controllers included
Storage expansion options: HPE MSA 2050 LFF Disk Enclosure or HPE MSA 2050 SFF Disk Enclosure or the HPE MSA 2050 SAN DC-Power Carrier Grade SFF Disk Enclosure
Clustering support: Windows, Linux, HP-UX, OpenVMS
SAN backup support: Yes
Systems Insight Manager support: Yes
Warranty: 3 Year Onsite Repair 24×7 4 Hour Response

Hãng sản xuất: HPE
Tình trạng: Có sẵn
Bảo hành: 36 tháng chính hãng

Mua hàng

Thông số sản phẩm
Form Factor/Height

Hard Drive

The flash-ready HPE MSA 2050 Storage system is designed for affordable application acceleration that is ideal for small and remote office deployments. But do not let the low cost fool you. The HPE MSA 2050 Storage system gives you the combination of simplicity, flexibility to grow now and into the future, and advanced features you may not expect to find in an entry-priced array. Start small and scale as needed with any combination of solid state disks (SSD), high-performance enterprise, or lower-cost midline SAS-based drives.

HPE MSA Storage has been the industry-leading entry storage Fibre Channel platform for the past eight years, with nearly 500,000 storage systems sold worldwide. Now the HPE MSA 2050 Storage system delivers 2x higher performance [1] than the previous generation at the same price, delivering in excess of 200,000 IOPS starting at under $10,000 USD for affordable application acceleration. It’s seriously simple and affordable flash-ready storage to help you get the most performance for the lowest cost.

· 200,000+ IOPS starting at under $10K for affordable application acceleration

– Flexible base model delivers 2x IOPS performance than the previous generation MSA for the same price.

· Advanced data services with no experience required

– Easy to install, easy to use, easy to maintain—no storage expertise necessary

– Automated tiering dynamically responds to workload changes, so you don’t have to

· Keep your business running with expanded data protection features

– New virtualized snapshot technology makes data protection and instant recovery a snap

– Remote replication with FC and iSCSI supports affordable disaster recovery

• Grow flexibly now and into the future

– Data-in-place upgrades protect drive investments and eliminate data migrations

– Start small and scale as needed with any combination of SSD, Enterprise or Midline SAS drives

What’s New in the MSA 2050 array family
• Introducing new MSA 2.4TB 12G SAS 10K SFF and 12TB 12G SAS 7,2K LFF hard drives

• Introducing new MSA 2050 SAS SFF and LFF Storage

• Introducing new MSA 2050 SAS NEBS SFF Storage

• Introducing new MSA 2050 SAS DC-Power LFF Storage

 

 HPE MSA 2050 Storage
Array
Access TypeBlock
Form Factor2U, SFF or LFF
Number of controllers per array2
Number of host ports per array8
FC host connectivity8/16Gb
iSCSI host connectivity1Gb or 10Gb
SAS host connectivity6Gb or 12Gb
Cache, per array
Max Read cache per array8TB
Data (read/write) cache + system memory per array16GB
Pool Capacity (with Large Pool Support)562 TB (512 TiB)
RAID Levels supported: Virtual modeRAID 1, 5, 6, 10
Enclosures
Expansion Drive Enclosures0-7 enclosures
LFF/SFF array/enclosure mixingSupported
Maximum number of drives per array enclosure24 SFF/12 LFF
Maximum number of drives per drive enclosure24 SFF/12 LFF
Drive enclosure interface type6Gb SAS
Drives
Maximum total HDDs per array192 SFF / 96 LFF
Maximum total SSDs per array192 SFF / 96 LFF
Max raw capacity per array enclosure76.8 TB SFF / 144TB LFF
Max raw capacity per drive enclosure76.8 TB SFF / 144TB LFF
Max raw capacity per array614.4TB SFF / 1152TB LFF
Drive Capacities
SFF SSDs (Mixed Use)400GB, 800GB, 1.6TB, 3.2TB
LFF SSDs (Mixed Use)400GB, 800GB
SFF HDDs15K: 300GB, 600GB, 900GB

10K: 300GB, 600GB, 900GB, 1.2TB, 1.8TB, 2.4TB
7.2K: 1.0TB, 2.0TB

LFF HDDs7.2K: 2TB, 4TB, 6TB, 8TB, 10TB, 12TB
SEDs10K SFF: 1.2TB

7.2K LFF: 4TB

Software Features
Thin TechnologiesThin Provisioning, Space Reclamation, Thin Rebuild
TieringPerformance Tier, Standard Tier, Archive Tier
ReplicationSnapshots (512), Volume Copy, Remote Snaps
Quality of ServiceVirtual Tier Affinity
Additional Features
Maximum number of volumes512
Maximum number of snapshots512
Maximum number of hosts512
Maximum number of initiators1024
Customer self-installableYes
Customer self-repairableYes
Customer self-upgradeableYes
HPE MSA 2050 Storage
1.AC or DC Power supplies4.Management Ethernet port
2.Host connection ports

8 and/or 16Gb FC,

1 and/or 10GbE iSCSI or

6 and/or 12Gb SAS

5.Expansion port
3.CLI port (mini-USB)

 

 

MSA 2050 DescriptionsPart Number
Storage ModelsHPE MSA 2050 SAN Dual Controller LFF Storage1,3Q1J00A
HPE MSA 2050 SAN Dual Controller SFF Storage1,3Q1J01A
 HPE MSA 2050 SAN NEBS Certified DC-Power SFF Storage2,3Q1J04A
 HPE MSA 2050 SAN DC-power LFF Storage 2,3Q1J79A
 HPE MSA 2050 SAS Dual Controller LFF Storage 1,4Q1J28A
 HPE MSA 2050 SAS Dual Controller SFF Storage 1,4Q1J29A
 HPE MSA 2050 SAS NEBS SFF Storage 2,4Q1J32A
 HPE MSA 2050 SAS DC-Power LFF Storage 2,4Q2P39A
  

NOTES:

Includes an LFF or SFF Array Chassis depending on model, two MSA 2050 SAN or SAS controllers, two AC power supplies, no drives

2Includes an LFF or SFF Array Chassis depending on model, two MSA 2050 SAN or SAS controllers, two DC power supplies, no drives

3SFPs not included

4SFP not required with SAS controllers

 

 
 

 

ENERGY STAR CertificationThe HPE MSA 2050 Storage systems are ENERGY STAR certified. ENERGY STAR certified products are energy efficient which result in cost savings via reduced energy consumption and regulatory rebates. Please refer to the US EPA website for details on ENERGY STAR certification criteria and process. MSA 2050 ENERGY STAR Certification is listed on the EPA website.
Carrier-Grade Storage System (NEBS)The HPE MSA 2050 SAN and SAS NEBS Certified DC-Power Storage systems are designed for network equipment providers (NEPs) and communication service providers. Suited for those customers who need a robust telecom infrastructure. The NEBS compliant MSA 2050 Storage system (Q1J04A and Q1J32A) supports configurations with up to 7 compliant disk enclosures for a maximum of 192 SFF HDDs or SSDs.

 

The HPE MSA 2050 SAN and SAS DC-power LFF Storage systems (Q179A and Q2P39A) include two (DC) power supplies, but is not NEBS certified. The two power supplies are designed to operate over the input range of -40VDC to -75VDC.

The HPE MSA 2050 DC-power Carrier Grade SFF Disk Enclosure (Q1J05A) is a special model disk enclosure designed for use with NEBS compliant MSA 2050 configurations. This drive enclosure has 24 drive bays and has dual -48VDC-power supplies. It is only sold with carrier grade arrays.

When used in conjunction with specific Storage SFF SAS drives, the solution is NEBS certified (GR-63-Core and GR-1089-Core) and Seismic Zone 4 rated. NEBS level-3 certification provides the assurance that the equipment is safe to operate and sturdy enough to withstand certain physical and environmental (for example, fire, earthquakes) conditions. For Seismic Zone 4 rating, the MSA 2050 must be mounted in an HPE Seismic Rack (AH335A).

SKU DescriptionNEBs Certified SKUs
HPE MSA 2050 SAN NEBS Certified DC Power SFF StorageQ1J04A
HPE MSA 2050 SAS NEBS Certified DC Power SFF StorageQ1J32A
HPE MSA 2050 SAN DC-power Carrier Grade SFF Disk EnclosureQ1J05A
HP MSA 300GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty HDDJ9F40A
HP MSA 450GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty HDDJ9F41A
HP MSA 600GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty HDDJ9F42A
HPE MSA 900GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty HDDQ1H47A
HP MSA 300GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty HDDJ9F44A
HP MSA 600GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty HDDJ9F46A
HP MSA 900GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty HDDJ9F47A
HP MSA 1.2TB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty HDDJ9F48A
HPE MSA 400GB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State DriveN9X95A
HPE MSA 800GB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State DriveN9X96A
HPE MSA 1.6TB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State DriveN9X91A
HPE MSA 3.2TB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State DriveN9X92A
HPE MSA 1.2TB 12G SAS 10K SFF (2.5in) Enterprise Self Encrypted 3yr Wty HDDP9M81A

 

All MSA 2050 models offer a common set of valuable features:
  • MSA 2050 storage system architecture maximizes performance

– Includes SFF or LFF array chassis, depending on model

– Two MSA SAS or SAS controllers, depending on model

ú Four host ports per controller

ú Each SAN controller supports 8 Gb FC, 16 Gb FC, 1GbE iSCSI or 10GbE iSCSI. host connectivity

ú Each SAS controller supports 12Gb SAS host connectivity

– 8 GB cache per controller.

– Battery-free cache backup with super capacitors and compact flash

  • MSA 2050 SAN controller allows customers to create their own Combo Controller by mixing FC and iSCSI SFPs. Below are the valid configurations for mixing SFPs:
Configuration Table for mixing SFPs
ConfigurationControllerHost Port 1 SFP1Host Port 2 SFP1Host Port 3 SFP2Host Port 4 SFP2
Dual SAN ControllerController A16Gb FC16Gb FCNoneNone
16Gb FC16Gb FC
8Gb FC8Gb FC
10GbE iSCSI10GbE iSCSI
1GbE iSCSI1GbE iSCSI
8Gb FC8Gb FCNoneNone
16Gb FC16Gb FC
8Gb FC8Gb FC
10GbE iSCSI10GbE iSCSI
1GbE iSCSI1GbE iSCSI
10GbE iSCSI10GbE iSCSINoneNone
10GbE iSCSI10GbE iSCSI
1GbE iSCSI1GbE iSCSI
1GbE iSCSI1GbE iSCSINoneNone
10GbE iSCSI10GbE iSCSI
1GbE iSCSI1GbE iSCSI
Controller BMatch Controller AMatch Controller AMatch Controller AMatch Controller A
NOTES: 1 SFP in Host Port 1 must match SFP in Host Port 2
2SFP in Host Port 3 must match SFP in Host Port 4

 

All MSA 2050 models offer a common set of valuable features (cont):
  • Storage Management Utility V3 (SMU). The MSA management GUI brings a new modern look and feel to array management.
  • Thin Provisioning allows storage allocation of physical storage resources only once they are consumed by an application. Thin Provisioning also allows over-provisioning of physical storage pool resources allowing ease of growth for volumes without predicting storage capacity upfront.
  • All models feature a wide variety of drives: High-performance SSD drives, enterprise-class SAS, and SAS Midline drives.
  • The MSA 2050 will support a maximum of 7 disk enclosures (either LFF and/or SFF). Add-on enclosures can either be HPE MSA 2050 LFF Disk Enclosure or HPE MSA 2050 SFF Disk Enclosure.
  • The MSA 2050 can grow incrementally to a maximum of 96 LFF, 192 SFF drives, or a combination of SFF and LFF enclosures up to the maximum of 8 total enclosures.
  • Virtual Storage Disks Groups can be spanned across multiple enclosures.
  • Virtual Storage RAID levels supported: 1, 5, 6, 10.
  • Maximum hard drive counts vary by RAID levels: 2 drive max for RAID level 1; max of 16 drives for RAID levels 5, 6, and 10.
  • Multiple Disk Groups can be aggregated into a single Storage Pool.
  • Storage Pools allow data on a given LUN to span across all drives in a pool. When capacity is added to a system, the user is also getting a performance benefit of the additional spindles.
  • The maximum LUN size is 140TB (128TiB)
  • Snapshot enhancements for virtual storage, including performance improvements, hierarchical snapshots, and simplified resource management. Administrators can monitor and optionally control snapshot space usage.
  • Prioritize data by assigning appropriate affinity level (Performance, No Affinity or Archive)
  • Customers can configure 512 TiB capacity per virtual pool by enabling large pool support.
  • Non-disruptive on-line controller code upgrade. Requires Multi-pathing software.
  • Upgradable by design. Owners of an MSA 2040, MSA 2042 and MSA 1040 array are able to do data-in-place upgrades to the new MSA 2050 array. This unique ability protects the earlier investments in drives, and JBODs.

– Certain limitations are applicable. Please review  the Upgrading to the HPE MSA 1050/2050/2052 Technical Whitepaper before upgrading your MSA 2040, MSA 2042 or MSA 1040 systems

Application

Solutions

The HPE MSA 2050 Storage is the ideal solution for customers running Oracle, Microsoft, SAP environments and those customers who are deploying virtual server technologies like VMware and Hyper-V. The MSA 2050 delivers enterprise functionality that enhances virtual environments, simplifies management, and reduces costs. Easy to deploy, scale and maintain, HPE MSA 2050 Arrays ensure that crucial business data remains available.

Hewlett Packard Enterprise has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization Hypervisor technology through extensive testing with the HPE MSA 2050, HPE servers, and management software; high availability and disaster recovery solutions; and backup and recovery on the Oracle, Microsoft, and SAP application platforms.

Learn moreTo learn more about specific HPE Storage Solutions that are built with Oracle, Microsoft, SAP and Virtualization environments in mind, visit the solution sites supporting each of these applications.

HPE MSA Storage hyperlink to: http://www.hpe.com/storage/MSA

Standard Features

Product Technology
SAN controllerMSA 2050 SAN controller supports 8Gb FC, 16Gb FC, 1GbE iSCSI or 10GbE iSCSI host connectivity.
SAS controllerMSA 2050 SAS controller supports 6Gb and/or 12Gb SAS  host connectivity.
Modular

Chassis

2U rack height. 12 LFF or 24 SFF drive bays. All MSA 2050 Storage Systems come standard with 2 SAN or SAS controllers, depending on model.

NOTE: The MSA 2050 does not support single controller configurations. Single-controller support is provided only when a controller fails over to its partner controller.

Drives availableThe MSA 2050 SAN or SAS Storage systems support both the MSA 3.5-inch LFF drives, and the MSA 2.5-inch SFF drives.

· Solid State Drives (SSDs) deliver exceptional performance for applications requiring high random read IOPs performance.

· Serial Attached SCSI (SAS) enterprise-class drives are designed for high demand, 24×7 usage.

· SAS Midline drives are usually reserved for archival of data as they are relatively inexpensive and are available in very large capacities.

Optional Disk EnclosuresJust as the user has a choice of chassis for the array enclosure (LFF or SFF drive bays), they also have a choice of expansion disk enclosures accommodating either drive size. Both the MSA 2050 LFF Disk Enclosure and MSA 2050 SFF Disk Enclosure can be hot-added to an operating array. SFF and LFF Array enclosures and Disk Enclosures can be mixed without limitations.

MSA 2050 LFF Disk Enclosure. This 2U enclosure is designed to support twelve HPE Storage LFF drives and accepts MSA dual-ported 12Gb SSD and SAS Midline hard drives. The pre-configured MSA 2050 LFF Disk Enclosure has two I/O modules and supports the MSA 2050 dual controller arrays.

• The MSA 2050 LFF Disk Enclosure can be attached to the MSA 2050 LFF or SFF storage models.

• Each MSA 2050 LFF Disk Enclosure ships standard with two .5m mini-SAS to mini-SAS cables for connection to the MSA 2050 array expansion port or existing disk enclosure cascade port.

• LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 7 total Disk Enclosures

 HPE MSA 2050 LFF Disk Enclosure                                                                                                                        Q1J06A
 
 HPE MSA 2050 SFF Disk Enclosure. This 2U enclosure is designed to support twenty four HPE Storage 2.5-inch SFF drive bays and accepts MSA dual ported 12Gb SSD, Enterprise SAS, or SAS Midline hard drives. The pre-configured MSA 2050 SFF Disk Enclosure has two I/O modules and supports the MSA 2050 dual controller arrays.

• The MSA 2050 SFF Disk Enclosure can be attached to the MSA 2050 LFF or SFF storage models

• Each MSA 2050 SFF Disk Enclosure ships standard with a two .5m mini-SAS to mini-SAS cables for connection to the MSA 2050 array expansion port or existing disk enclosure cascade port.

• LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 7 total Disk Enclosures.

 HPE MSA 2050 SFF Disk Enclosure                                                                                                                         Q1J07A
  
ScalabilityThe MSA 2050 array configurations are designed to allow an installation to begin with smaller capacity and be able to grow gradually as needed. The flexibility of SSD, Enterprise SAS or SAS Midline drives technology, form factors, sizes, speeds, and costs per GB allows a system to easily fit in almost any budget.

  • Large Form Factor configurations can scale up to 144TB SAS Midline per array enclosure, expandable to 1152TB SAS Midline with the addition of a maximum of seven MSA 2050 LFF Disk Enclosure.
  • Small Form Factor configurations can scale up to 76.8 TB SAS SSDs per array enclosure, expandable to 614.4 TB SAS with the addition of a maximum of seven MSA 2050 SFF Disk Enclosure.
  • Users may configure an MSA 2050 SFF array enclosure with MSA 2050 LFF Disk Enclosure. This is an excellent option for a configuration that supports high-speed SFF SSDs or fast SFF enterprise-class SAS drives in the array enclosure, combined with economical LFF drives staged for archival purposes, all in the same array.
Disk GroupA Disk Group is a collection of disks in a given redundancy mode (RAID 1, 5, 6, 10). Disk Group RAID level and size can be created based on performance and/or capacity requirements. Multiple Disk Groups can be allocated into a Storage Pool for use with the Virtual Storage features.
LUNsThe MSA 2050 arrays support 512 volumes and up to 512 snapshots in a system. All of these volumes can be mapped to LUNs. Maximum LUN sizes up to 140TB (128 TiB). Thin Provisioning allows the user to create the LUNs independent of the physical storage.
Storage PoolsStorage Pools are comprised of one or more Disk Groups. A volume’s data on a given LUN can now span all disk drives in a pool. When capacity is added to a system, users will benefit from the performance of all spindles in that pool.

The MSA 2050 supports large, flexible Volumes with sizes up to 128TiB and facilitates seamless capacity expansion. As pools are expanded data automatically reflows to balance capacity utilization on all drives.

RAID 1, 5, 6, 10The MSA 2050 features several important additional RAID levels. RAID 6 offers the highest level of RAID protection. It allocates two sets of parity data across drives and allows simultaneous write operations. It can withstand two simultaneous drive failures without downtime or data loss. RAID 10 is mirroring and striping without parity and allows large Disk Groups to be created with high performance and mirroring for fault tolerance. RAID 5 combines the block striping and parity. Because data and parity are striped across all of the disks, no single disk is a bottleneck. Striping also allows users to reconstruct data in case of a disk failure.
PerformanceThe performance figures provided here are for reference as many variables exist between array configurations, workloads, hard drive types, disk group setup parameters and host system setup. Hewlett Packard Enterprise has traditionally published a set of end-to-end MSA performance specifications that are fed into HPE Sizer tools which are based on conservative real-world configurations. For consistency, the MSA performance numbers have been documented in both Benchmark and End-to-End Performance tables. Complete End-to-End Performance results will be provided for the MSA 2050 in a subsequent publication. These numbers are subject to change without notice.

MSA 2050 End-to-End Performance Results:

MSA 2050 Array Performance 1HPE MSA 2050
Converged SAN Controller
with HDDs
HPE MSA 2050
Converged SAN Controller
with Mixed Use SSDs
Protocol (host connect)16 Gb Fibre Channel16 Gb Fibre Channel
MSA 2050 RAID 1 SSD Performance Results 2
Random Reads (IOPs)220,800
Random Writes (IOPs)103,000
MSA 2050 RAID 5 Performance Results 3,4
Segmented Sequential Reads (MB/s)5,290
Segmented Sequential Writes (MB/s)4,650

End-to-End performance notes

1) Performance results were generated using internal HPE test tools. Number and type of applications, drive type and number of drives, operating system used, and the number of hosts will affect overall performance. This table is provided strictly as a test-lab comparison

2) Dual Controller configuration, (8) 400GB Mixed Use SSDs, RAID: 1, two drives per Disk Group; two Disk Groups per Pool, 2 volumes per Pool, block size: 8k, average latency under 5ms, Windows Server 2012 host, 16Gb FC direct connect to array

3Dual Controller configuration, (72) 15k HDD, RAID: 5, nine drives per Disk Group, 4 Disk Groups per Pool, 32 volumes per Pool, block size: 256k, average latency under 30ms, Windows Server 2012 host, 16Gb FC direct connect to array

4). Sequential performance numbers were generated using segmented sequential workloads. For segmented sequential workloads with a queue depth greater than 1, each sequential stream is targeted to operate on a separate LBA range. Other types of sequential workloads that target specific LBA ranges may achieve higher results.

End-to-End Performance Figures using Virtual Storage

 

HPE MSA 2050 End-to-End Performance Figures 1
Controller ModelHPE MSA 2050 SANHPE MSA 2050 SAS
Host Protocol 216 Gb FC10 GbE iSCSI1 GbE iSCSI12 Gb SAS
Drive TechnologyHDDSSDHDDSSDHDDSSDHDDSSD
MSA 2050 RAID 10 Performance Results 3,4,5,11  ** NOTE: RAID 1 was used for SSD testing.
Random Reads IOPS63,600220,80063,500208,40063,200103,70050,800219,100
Random Writes IOPS37,300103,00037,30094,30037,20093,30037,10097,500
Random Mix 60/40 IOPS47,600142,10046,600133,00046,800130,50044,500138,800
Sequential Reads MB/s5,3505,3508805,350
Sequential Writes MB/s3,1103,1108803,120
MSA 2050 RAID 5 Performance Results 6,7,12
Random Reads IOPS56,300219,20055,800201,40056,000103,40047,300209,600
Random Writes IOPS18,10043,40018,00041,40018,30040,60018,00043,100
Random Mix 60/40 IOPS29,10080,00029,20075,40028,70073,90028,00078,700
Sequential Reads MB/s5,2905,2808805,290
Sequential Writes MB/s4,6503,8708804,710
MSA 2050 RAID 6 Performance Results 8,9,10,13
Random Reads IOPS56,100219,00055,700201,30055,700105,00047,400209,800
Random Writes IOPS13,00036,00013,00035,60013,20035,30013,00036,700
Random Mix 60/40 IOPS21,40072,20021,20068,50021,30067,30021,30071,500
Sequential Reads MB/s5,5505,5308805,560
Sequential Writes MB/s4,4403,6808804,600

 

NOTE: Number and type of applications, drive type and number of drives, operating system used, and the number of hosts will affect overall performance. This table is provided strictly as a test-lab comparison. These numbers reflect a full array configuration with the maximum number of front-end ports and controllers. The test results shown for the HPE MSA 2050 are designed to give a conservative reference point for comparisons.
1) Sequential tests (MB/s) are based on 256K block sizes and random tests (IOPS) are based on 8K block sizes run against the storage. For sequential workloads with a queue depth greater than 1, each sequential stream is targeted to operate on a separate LBA range. Other types of sequential workloads that target specific LBA ranges may achieve higher results.  Results cannot be expected with a single host.
2) Fibre Channel results were measured using 16 Gb FC Host Bus Adapters. SAS results were measured using 12 Gb SAS Host Bus Adapters. 10 GbE iSCSI results were measured using 10GbE iSCSI Host Bus Adapters. 1 GbE iSCSI results were measured using 1GbE network interface controllers (NICs).  Hosts were directly attached to the HPE MSA 2050 array.
3) MSA 2050 RAID 10 Hard Disk Drive (HDD) random results:  Dual Controller configuration, (192) 15K HDD, 12 drives per disk group, 8 disk groups per pool, 8 volumes per pool.
4) MSA 2040 RAID 10 Hard Disk Drive (HDD) sequential read results:  Dual Controller configuration, (96) 15K SAS HDDs, 12 drives per disk group, 4 disk groups per pool, 4 volumes per pool.
5) MSA 2040 RAID 10 Hard Disk Drive (HDD) sequential write results:  Dual Controller configuration, (48) 15K SAS HDDs, 12 drives per disk group, 2 disk groups per pool, 4 volumes per pool.
6) MSA 2050 RAID 5 Hard Disk Drive (HDD) random results:  Dual Controller configuration, (180) 15K HDD, 9 drives per disk group, 10 disk groups per pool, 10 volumes per pool.
7) MSA 2050 RAID 5 Hard Disk Drive (HDD) sequential results:  Dual Controller configuration, (72) 15K HDD, 9 drives per disk group, 4 disk groups per pool, 4 volumes per pool.
8) MSA 2050 RAID 6 Hard Disk Drive (HDD) random results:  Dual Controller configuration, (180) 15K HDD, 10 drives per disk group, 9 disk groups per pool, 9 volumes per pool.
9) MSA 2050 RAID 6 Hard Disk Drive (HDD) sequential read results:  Dual Controller configuration, (80) 15K HDD, 10 drives per disk group, 4 disk groups per pool, 4 volumes per pool.
10) MSA 2050 RAID 6 Hard Disk Drive (HDD) sequential write results:  Dual Controller configuration, (40) 15K HDD, 10 drives per disk group, 2 disk groups per pool, 4 volumes per pool.
11) MSA 2050 RAID 1 Solid State Drives (SSD) results: Dual Controller configuration, (8) SSDs, 2 SSDs per disk group, 2 disk groups per pool, 4 volumes per pool.
12) MSA 2050 RAID 5 Solid State Drives (SSD) results: Dual Controller configuration, (6) SSDs, 3 SSDs per disk group, 1 disk group per pool, 4 volumes per pool.
13) MSA 2050 RAID 6 Solid State Drives (SSD) results: Dual Controller configuration, (8) SSDs, 4 SSDs per disk group, 1 disk group per pool, 4 volumes per pool.

 

Configuration and Management ToolsManagement access, out-of-band, Storage Management Utility (SMU), CLI.

Interface Types: USB 100/1000 Ethernet.

Protocols Supported SNMP, SMI-S, SSH, SMTP, FTP, SFTP, HTTP, HTTPS, Telnet

Web Browser supportThe MSA 2050 arrays come integrated with web browser and CLI based software for storage and RAID management, setup, configuration, and troubleshooting. The MSA 2050 management supports Microsoft Internet Explorer, Mozilla Firefox, and Google Chrome.
Hot Plug Expansion and Replacement SupportAll MSA 2050 models support hot plug expansion and replacement of redundant controllers, enclosures, fans, power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of disk enclosures is also supported.
HPE Server CompatibilityThe MSA 2050 supports most HPE ProLiant, BladeSystems and Integrity servers including

· HPE ProLiant DL, ML Servers

· HPE c-Class Blade Servers

· Integrity servers, IA64

· Compatibility must be confirmed at: http://www.hpe.com/storage/spock

NOTE: depends on protocol.

3rd Party  server

support

The MSA 2050 supports most multi-vendor industry standard Intel and AMD based (x86) servers. Hewlett Packard Enterprise requires the Third-Party Server to be logged and listed on the Microsoft Windows Server Catalog.

· Hewlett Packard Enterprise recommends that the Third-Party Server Vendor is an active member of TSANet. Refer to the TSANet website for details: http://www.tsanet.com

· Non-HPE servers will generally be supported if the HPE storage stack is used. This includes supported HPE branded HBAs and drivers, and supported FC switches.

OS SupportRefer to the Hewlett Packard Enterprise support statements for complete current OS version support: http://www.hpe.com/storage/spock

  • Microsoft Windows Server 2016
  • Microsoft Windows Server 2012
  • VMware
  • HP-UX
  • Red Hat Linux
  • SuSE SLES Linux

NOTE: depends on protocol.

Software

Advanced Data Services SuiteThe HPE MSA Advanced Data Services Suite can be purchased as an option on the MSA 2050 Storage systems. The Advanced Data Service Suite is included as a standard feature on the MSA 2052 at no extra charge.  See the MSA 2052 QuickSpecs for more information.

The optional Advanced Data Services Suite includes the following functionality:

• Performance Tiering and Archive Tiering

• 512 Snapshots and Volume Copy

• Remote Snaps

 HPE MSA Advanced Data Services Suite  LTUQ0H99A
 HPE MSA Advanced Data Services Suite E-LTUQ0H99AAE
Performance Tiering and Archive Tiering

 

Disk tiers are comprised of aggregating 1 or more Disk Groups of similar physical disks. The MSA 2050 supports 3 distinct tiers:

1. A Performance tier with SSDs

2. A Standard SAS tier with Enterprise SAS HDDs

3. An Archive tier utilizing Midline SAS HDDs.

The MSA 2050 supports sub-LUN tiering and automated data movement between tiers. The MSA 2050 automated tiering engine moves data between available tiers based on the access characteristics of that data. Frequently accessed “pages” will migrate to the highest available tier delivering maximum I/O´s to the application.

Configurations which have a mixture of both SSDs and HDDs within the same system being used as a capacity Tier (excluding SSD Read Cache), will require the Advanced Data Service Suite LTU.  This rule applies to the system level and therefore the license is required regardless of whether the drives are configured for auto-tiering within the same Pool. All SSD configurations and SSD Read Cache extension do not require a license on the MSA2050 array.

Snapshot and
Volume Copy
• All MSA 2050 arrays come standard with 64 snaps.

• A 512 Snapshot license is available as an option on the MSA 2050

• Snapshots create up to 512 point-in-time copies of data

• Volume Copies create up to 128 point-in-time copies of data

• Volume copies become standard volumes when they are complete

• Recovery is instant – revert data from any previous Snapshot or Volume Copy

• Backup ‘snapped’ data to disk, virtual tape, or physical tape without a backup window

• If telephone support and software updates are desired for bundled software functionalities like 64 snapshots and volume copy software, a combination HW + SW support care pack must be purchased.

• Hewlett Packard Enterprise does not provide warranty assistance for software products included with our base hardware products. Support is available with either the SupportPlus or SupportPlus24 Service options the hardware warranty component of these services is accounted for in the pricing of the SP and SP24 care packs.

Remote Snap• HPE MSA Remote Snap Software is array based software that provides remote replication on the HPE MSA 2050 array products. MSA Remote Snap is a form of asynchronous replication which consists of replication of block-level data from a volume on a local system to a volume on a second independent system. This second system may be co-located with the first system or may be located at a remote site.

• HPE Remote Snap functionality is based on existing Snapshot technology offered by HPE MSA array products. Snapshots are used to track the data to be replicated as well as to determine the differences in data updated on the master volume, minimizing the amount of data to be transferred.

• HPE Remote Snap replication technology provides the ability to accomplish key data management and protection capabilities. First, because Remote Snap uses snapshots as the underlying technology it creates multiple local recovery points which can be used for such tasks as to complement daily backups; second, replication provides the ability to access data in a remote site which could be used for dispersed operations; and third but definitely not least important replication allows for business continuance in the event of a failure on the primary site.

• In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a point-in-time image of the data. This point-in-time image is then replicated to the destination volume by copying the data represented by the snapshot via a transport medium such as TCP/IP (iSCSI) or Fibre Channel. The amount of data transferred is minimized though the use of snapshots whenever possible.

NOTE:  One Advanced Data Services Suite License per array is required for replication. For example, if you have two MSA arrays performing replication (from Primary system to Remote System), you will need a total of 2 licenses.

 

Product Features

• Storage based asynchronous snapshot replication

• Support of both Ethernet and Fibre Channel interconnects provides flexible options to the application environments.

• Snapshot based replication technology means only changed data will be replicated to alternate site

• Many to 1 replication (up to 4 nodes) – primary use case is to replicate from “many” branch offices to the home office for the purpose of backing up data from the branches

• Advanced scheduler provides several options to IT administrators for business continuance

• Flexible architecture allows remote replication between MSA 2050 and MSA 2040 or MSA 1040 arrays using the virtual storage architecture and licensed for Remote Snap. Protects existing investments and enhances business continuity planning objectives.

• Snapshot based replication enables both local and remote recovery depending on the need. Snapshot replication isolates problems to a specific point in time which can be selected by the administrator. Additionally snapshot replication supports longer distance replication.

• Multiple relationships provide greater storage flexibility and utilization.

• 512 Snapshots and Volume Copy integration provides better efficiencies by combining the management and array technologies to create local copies.

• Fast application recovery with minimal or no transaction loss

• Creation of disaster tolerant copies of your critical business data

• No-single-point-of-failure solution to increase the availability of your data

HPE OneView for VMware vCenterHPE OneView for VMware vCenter is a component within the HPE OneView plug-in for vCenter. It provides VMware administrators that are using VMware’s vSphere management console (vCenter) with the ability to see how virtual machines are mapped to datastores and individual MSA 2050 volumes. By providing these clear relationships between VM’s, datastores and storage, the VMware administrator’s productivity increases, as does the ability to ensure quality of service. Roles for administrators can be defined on an individual basis, providing the ability to apply specific permissions for both view and control functions.

HPE OneView for VMware vCenter supports mixed array environments including MSA 2050/2052, MSA 2040/2042, MSA 1040, P2000, EVA, P4000, and the XP array series including the P9500.

When deployed with the MSA 2050 array, HPE OneView provides the following:

  • Active Management functionality for the MSA 2050 array:

– Create/Expand/Delete a Datastore

– Create a Virtual Machine from a template

  • Monitors the health and status of the MSA 2050
  • Displays LUN / volume connections from VMs and ESX servers to the arrays and provides the location and attributes of the MSA 2050 within the SAN
  • Identifies what storage features are available to allow administrators to match the features available on the MSA 2050 to their requirements
  • Provide a cluster-level view of the storage

HPE OneView for VMware vCenter is downloadable from Software Depot: https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=HPVPR

For more information on HPE OneView for VMware vCenter visit: http://h22168.www2.hpe.com/us/en/partners/vmware/

HPE StoreFront Manager for MicrosoftHPE StoreFront Manager for Microsoft enables management and monitoring of HPE MSA Storage running in Microsoft Hyper-V environment with a single pane-of-glass view to events/alerts, capacity and health dashboards and detailed virtual infrastructure information. It integrates seamlessly with Microsoft System Center Operations Manager (SCOM) and provides Microsoft administrators the following:

 

It supports heterogeneous HPE Storage environment including HPE MSA, HPE StoreVirtual, HPE 3PAR StoreServ, HPE StoreOnce, HPE StoreEasy, HPE XP, HPE EVA and HPE StoreEver Storage.

 

When deployed with the MSA 2050 array, HPE StoreFront Manager provides the following:

· Monitors the health, events and alerts for the MSA 2050 – virtual Pools, and volumes

· Provides detailed information on the VMs provisioned through MSA Storage

· Effortless installation and configuration using Powershell

 

HPE StoreFront Manager for Microsoft for MSA Storage is downloadable from Software Depot: https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=System_Center

vStorage API for Array Integration (VAAI)The vStorage API for Array Integration (VAAI) is one of the storage application programming interface (API) sets in vSphere. VAAI is an API storage partners can leverage to enhance performance of virtual machine (VM) management operations by delegating these operations to the storage array. With hardware offload, ESX/ESXi hosts perform certain operations faster and consume less server CPU and memory resources, and also storage port and storage fabric bandwidth. VAAI includes high performance and scalable VM data path primitives.

Storage Hardware Primitives for VAAI

  • Full Copy or Hardware Assisted Move
  • Block Zeroing or Hardware Assisted Zeroing
  • Hardware Assisted Locking or Atomic Test and Set (ATS)

UNMAP reclaims space that is no longer on a thinly provisioned VMFS volume

Warranty, Service and Support Information

WarrantyThree-year limited warranty, parts exchange Next Business day delivery

Enclosures, Hard drives, and Options for the MSA 2050 carry their own warranty. Refer to Hewlett Packard Enterprise Limited Warranty Statement for more information.

The MSA 2050 has been designed with customer self-repairable parts to minimize repair time and provide greater flexibility in performing defective parts replacement. Please refer to Hewlett Packard Enterprise limited warranty Statement and parts replacement instructions for further details.

NOTE: The warranty of the hard drive options purchased with the MSA 2050 models is different for SAS hard drives versus SAS Midline. SAS hard drive options have a three year warranty and SAS Midline have a one year warranty.

Solid State Drives (SSD)
Warranty
3/0/0 warranty; Customer Self Repair (CSR) subject to maximum usage and or maximum supported lifetime limitations, whichever occurs first. Maximum Supported Lifetime is the period in years set to equal the warranty for the device. Maximum usage limit is the maximum amount of data that can be written to the device before reaching the device’s write endurance limit.
Service and SupportProtect your business beyond warranty with HPE Support Services

HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional, and Operational Services to help accelerate your digital transformation. From the onset of your transformation journey, Advisory and Transformational Services focus on designing the transformation and creating a solution roadmap. Professional Services specializes in creative configurations with flawless and on-time implementation, and on-budget execution.  Finally, operational services provides innovative new approaches like Flexible Capacity and Datacenter Care, to keep your business at peak performance. HPE is ready to bring together all the pieces of the puzzle for you, with an eye on the future, and make the complex simple.

Connect your devicesUnlock all of the benefits of your technology investment by connecting your products to Hewlett Packard Enterprise. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a single consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and increase optimization. All of these benefits are already available to you with your server storage and networking products, securely connected to HPE support

 

 IDC

2 HP CSC reports 2014-2015

 

Learn more about getting connected at http://www.hpe.com/services

Optimized CareHPE Proactive Care with 6 hour call-to-repair commitment, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive reports with recommendations and advice. This Service combines three years’ proactive reporting and advice with our highest level of hardware support; HPE’s 24×7, six hour hardware call-to-repair. HPE is the only leading manufacturer who makes this level of coverage available as a standard service offering for your most valuable servers and storage, including the HPE MSA 2050/2052 Storage.

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

Standard CareHPE Proactive Care with 24×7 coverage, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive reports with recommendations and advice This Service combines three years proactive reporting and advice with our 24×7 coverage, four hour hardware response time when there is a problem.

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

Basic CareHPE Foundation Care 24×7, three-year Support Service 

HPE Foundation Care 24×7 gives you access to HPE 24 hours a day, seven days a week for assistance on resolving issues. This service includes need based Hardware onsite response within four hours. Simplify your support experience and make HPE your first call to help resolve hardware or software problems.

https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en

Foundation CareHPE Foundation Care 24×7, three-year Support Service

HPE Foundation Care 24×7 gives you access to HPE 24 hours a day, seven days a week for assistance on resolving issues. This service includes need based Hardware onsite response within four hours. In addition, collaborative software support is included in this service that provides troubleshooting assistance on industry leading software running on your HPE server. Simplify your support experience and make HPE your first call to help resolve hardware or software problems. https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en

Parts and
Materials
HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.

Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer’s operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HPE due to malfunction.

Related ServicesHPE Hardware Installation

Provides for the basic hardware installation of HPE branded servers, HPE storage including the MSA 2050/2052 devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.

https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf

HPE Installation and Startup Service

Provides for the installation and startup of HPE technology including BladeSystems, C-Class enclosure, HPE ProLiant c-Class and Integrity server blades, storage blades, SAN switch blades, HPE Virtual Connect modules (Ethernet and Fibre Channel), Ethernet network interconnects, and InfiniBand, as well as the installation of one supported operating system type (Windows® or Linux). Included the HPE MSA 2050/2052.

HPE Datacenter Care service

Helps improve IT stability and security, increase the value of IT, and enable agility and innovation. It is a structured framework of repeatable, tested, and globally available services “building blocks.” You can deploy, operate, and evolve your datacenter wherever you are on your IT journey. With HPE Datacenter Care, you benefit from a personalized relationship with HPE via a single point of accountability for HPE and others’ products.

For more information, visit http://www.hpe.com/services

HPE Flexibly Capacity,

With Flexible Capacity, you get the speed, scalability, and economics of the public cloud in the privacy of your data center. Gain the advantages of the public cloud—consumption-based payment, rapid scalability without worrying about capacity constraints. Reduce the “heavy lifting” needed to operate a data center. And retain the advantages that IT provides the business (i.e., control, security). Deliver the right user experience, choose the right technology for the business, manage privacy and compliance, and manage the cost of IT. And, you have the option to use the public cloud when needed.

HPE Factory Express for Servers and Storage

HPE Factory Express offers configuration, customization, integration and deployment services for HPE servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HPE products supported through Factory Express include a wide array of servers and storage: HPE Integrity, HPE ProLiant, HPE Apollo, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000 servers as well as the HPE MSA Storage, HPE 3PAR Storage, HPE XP, rackable tape libraries and configurable network switches.

HPE Education Services

Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book on a class today and learn how to get the most from your technology investment. www.hpe.com/ww/learn

HPE Support Center

The HPE Support Center is a personalized online support portal with access to information, tools and experts to support HPE business products. Submit support cases online, chat with HPE experts, access support resources or collaborate with peers.

Learn more www.hpe.com/support/hpesc

HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE warranty, HPE Support Service or HPE contractual support agreement.

For more information: http://www.hpe.com/services