Synology RackStation RS2418RP+

$2,192 (giá chưa bao gồm VAT)

CPU Intel Atom C3538 quad-core 2.1GHz
Hardware encryption engine Yes (AES-NI)
Memory 4 GB DDR4 Non-ECC UDIMM (expandable up to 64 GB with 16 GB ECC UDIMM x 4)
Compatible drive type 12 x 3.5″ or 2.5″ SATA SSD/HDD (drives not included)
Hot swappable drive Yes
External port • 2 x USB 3.0 port
• 1 x Expansion port
Size (HxWxD)
• 88 x 430.5 x 664 mm (RS2418+)
• 88 x 482 x 696 mm (RS2418+ with server ears)
• 88 x 430.5 x 692 mm (RS2418RP+)
• 88 x 482 x 724 mm (RS2418RP+ with server ears)
Weight • 13.22 kg (RS2418+)
• 13.85 kg (RS2418RP+)
LAN 4 x 1GbE (RJ-45)
PCIe 3.0 slot
• x8 slot x 1 (4-lane)
• High-performance network interface card support
• M.2 SATA SSD adapter card support
Wake on LAN/WAN Yes
Scheduled power on/off Yes
System fan 4 (80 x 80 x 25 mm)
AC input power voltage 100V to 240V AC
Power frequency 50/60Hz, single phase

Hãng sản xuất: Synology
Tình trạng: Đặt hàng 02-03 tuần
Bảo hành: 36 tháng chính hãng

Mua hàng

CPU

CPU ModelIntel Atom C3538
CPU Architecture64-bit
CPU FrequencyQuad Core 2.1 GHz
Hardware Encryption Engine (AES-NI)

Memory

System Memory4 GB DDR4
Memory Module Pre-installed4 GB (4 GB x 1)
Total Memory Slots4
Memory Expandable up to64 GB (16 GB x 4)
Notes
  • Synology reserves the right to replace memory modules with the same or higher frequency based on supplier’s product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.
  • Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.

Storage

Drive Bays12
Maximum Drive Bays with Expansion Unit24
Compatible Drive Type* (See all supported drives)
  • 3.5″ SATA HDD
  • 2.5″ SATA HDD
  • 2.5″ SATA SSD
Maximum Internal Raw Capacity192 TB (16 TB drive x 12) (Capacity may vary by RAID types)
Maximum Raw Capacity with Expansion Units384 TB (192 TB + 16 TB drive x 12) (Capacity may vary by RAID types)
Maximum Single Volume Size*108 TB
Hot Swappable Drive
Notes
  • “Compatible drive type” indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
  • The maximum raw capacity is not limited by the maximum single volume size. Synology NAS models may utilize capacities over the maximum single volume size as long as each volume created is below the limit. (Learn more)
  • Each internal volume (may consist of multiple drives) is expandable up to 108TB.

External Ports

RJ-45 1GbE LAN Port4 (with Link Aggregation / Failover support)
USB 3.0 Port2
Expansion Port1

PCIe

PCIe Expansion1 x Gen3 x8 slot (black, x4 link)
Add-In-Card Support
  • PCIe Network Interface Card (Learn more)
  • M2D18 – Dual M.2 SATA/NVMe SSD adapter card for SSD cache

File System

Internal Drives
  • Btrfs
  • EXT4
External Drives
  • Btrfs
  • EXT4
  • EXT3
  • FAT
  • NTFS
  • HFS+
  • exFAT*
NotesexFAT Access is purchased separately in Package Center.

Appearance

Form Factor (RU)2U
Size (Height x Width x Depth)88 mm x 482 mm x 696 mm
88 mm x 482 mm x 724 mm (for RP model)
Weight13.22 kg
13.85 kg (for RP model)
Rack Installation Support*4-post 19″ rack (Synology Rail Kit – RKS1317)
NotesThe rail kit is sold separately

Others

System Fan80 mm x 80 mm x 4 pcs
80 mm x 80 mm x 4 pcs (for RP model)
Fan Speed Mode
  • Full-Speed Mode
  • Cool Mode
  • Quiet Mode
Easy Replacement System Fan
Power Recovery
Noise Level*54 dB(A)
54.1 dB(A) (for RP model)
Scheduled Power On / Off
Wake on LAN / WAN
Power Supply Unit / Adapter500 W
Redundant Power Supplyyes (for RP model)
AC Input Power Voltage100 V to 240 V AC
Power Frequency50/60 Hz, Single Phase
Power Consumption*109 W (Access)
52.4 W (HDD Hibernation)
119.6 W (Access) (for RP model)
55.9 W (HDD Hibernation) (for RP model)
British Thermal Unit371.92 BTU/hr (Access)
178.8 BTU/hr (HDD Hibernation)
408.09 BTU/hr (Access) (for RP model)
190.74 BTU/hr (HDD Hibernation) (for RP model)
Notes
  • Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s).
  • Support for Wake on WAN needs switch and routers which recognize Magic Packet.
  • Noise Level Testing Environment: Fully loaded with Seagate 2TB ST2000VN000 hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%

Temperature

Operating Temperature5°C to 35°C (40°F to 95°F)
Storage Temperature-20°C to 60°C (-5°F to 140°F)
Relative Humidity5% to 95% RH

Certification

  • EAC
  • VCCI
  • CCC
  • RCM
  • FCC
  • CE
  • BSMI

Warranty

3-year hardware warranty, extendable to 5-year coverage – EW202
NotesThe warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)

Environment

RoHS Compliant

Packaging Content

  • Main Unit X 1
  • Accessory Pack X 1
  • AC Power Cord X 1
  • AC Power Cord X 2 (for RP model)
  • Quick Installation Guide X 1

Optional Accessories

  • D4NE-2666-4G DDR4 non-ECC UDIMM*
  • D4EC-2666-16G DDR4 ECC UDIMM*
  • Surveillance Device License Pack
  • Expansion Unit: RX1217/RX1217RP X 1
  • Synology Ethernet Adapter E10G17-F2
  • Synology Ethernet Adapter E10G18-T1
  • Synology Ethernet Adapter E10G18-T2
  • Synology M2D18 M.2 SSD adapter card
  • Synology Rail Kit Sliding – RKS1317
  • VS360HD
  • VS960HD
Notes
  • The original non-ECC memory modules must be removed before the optional ECC memory modules can be installed. (Learn more)
  • Minimum DSM version requirement: 6.2.2
  • All memory modules will operate at the maximum frequency specified by the CPU manufacturer.

Notes:

  • Model specifications are subject to change without prior notice.
  • The figures are based on Synology internal testing. No other services or applications are processed during the performance tests.