HPE StoreEver 1/8 G2 LTO-7 Ultrium 15000 SAS Tape Autoloader (N7P35A)
$9,374 (giá chưa bao gồm VAT)
1/8 G2 LTO-7 Ultrium 15000 Tape Autoloader
Drive Technology: Ultrium 15000
Number of Drives: 1
Number of Slots: 8
Drive Interface: 8Gb/sec Fibre Channel 6Gb/sec SAS
Capacity Native: 48 TB
Compressed (2.5:1): 120 TB
Maximum Transfer Rate Native: 300 MB/s
HPE 1U Autoloader Rack Kit
Warranty : HPE 3Y Proactive Care 24×7 Service
Hãng sản xuất: HPE
Tình trạng: Đặt hàng 04-06 tuần
Bảo hành: 36 tháng chính hãng
The HPE StoreEver 1/8 G2 Tape Autoloader provides a cost-effective and easy-to-manage tape solution. The HPE 1/8 G2 autoloader combines incredible storage density and features into a compact 1U form factor. Capable of up to 120TB of compressed capacity in only a 1U form factor, the autoloader is well equipped to offer room for data growth. Web-based remote management offers the capability to quickly and easily access, configure, monitor, and troubleshoot the autoloader that will reduce dependencies on local IT staff while allowing multiple sites to be supported centrally. Protect confidential information with native encryption, ensuring that if a tape is lost or stolen your data is protected from unauthorized access. Proactively monitor utilization, operational performance, as well as health information for both the drive and media with TapeAssure. | ||||||||
What’s New | ||||||||
LTO-7 Ultrium 15000FC and SAS tape drives and tape media are now available. | ||||||||
Key Features |
| |||||||
Family Comparison | 1/8 G2 LTO-7 Ultrium 15000 Tape Autoloader | 1/8 G2 LTO-6 Ultrium 6250 Tape Autoloader | 1/8 G2 LTO-5 Ultrium 3000 Tape Autoloader | 1/8 G2 LTO-4 Ultrium 1760 Tape Autoloader | ||||
Drive Technology | Ultrium 15000 | Ultrium 6250 | Ultrium 3000 | Ultrium 1760 | ||||
Capacity (compressed 2.5:1) | 120 TB | 50 TB | ||||||
Capacity (compressed 2:1) | 24 TB | 12.8 TB | ||||||
Data Transfer (max native) | 300 MB/s | 160 MB/s | 140 MB/s | 80 MB/s | ||||
Interface | 8 Gb/sec FC 6 Gb/sec SAS | 8 Gb/sec FC 6 Gb/sec SAS | 8 Gb/sec FC 6 Gb/sec SAS | 3 Gb/sec SAS (LTO 5, 4, 3) | ||||
Product Highlights
Easy Installation | The 1/8 G2 Tape Autoloader ships as a rack-ready unit. A separate 1/8 G2 Tape Autoloader Rack Kit must be purchased to allow installation in a variety of HPE racks which include the 10000 series, 9000 series, 5000 series and System/E racks. A set of rubber feet are included in the box if you choose to use the unit on a tabletop or desk. For additional structural rigidity, Hewlett Packard Enterprise recommends the purchase of the 1/8 G2 Rack-to-Tabletop conversion kit which has a maximum load of 33 pounds (15 kilograms) and fully encloses the unit. |
Data Protector backup and recovery software | If the Autoloader is for a large environment that requires UNIX support and/or enterprise class application and feature support then HPE Data Protector is the recommended backup and recovery software. If current or future requirements will require Data Protector, this software should be installed from day 1. For more information and evaluation software please visit: http://www.hpe.com/storage/dataprotector. |
HPE StoreOpen Automation | HPE StoreOpen Automation is a free downloadable application that extends the LTFS capability to HPE Autoloaders and HPE MSL Tape Libraries. By simply mounting the tape autoloader or library as a file system, the intuitive HPE StoreOpen Automation interface makes it easier to copy, rename, create or move files. When a cartridge folder is selected for use, that tape is automatically moved to an available tape drive. For more information, including user guide, downloads and compatibility, visit: NOTE: Technical support is not available with this FREE software download. Software is run at your own risk. |
Manageability | The 1/8 G2 Tape Autoloader allows web-based remote manageability; the unit can be monitored and managed from across the room or across the globe. Functions included in the management tool include:
|
HPE Command View for Tape Libraries | HPE Command View TL for Tape Libraries aggregates multiple HPE tape libraries for centralized management. It is also the nerve center for TapeAssure data collection and analysis and manages the MSL classes of tape libraries & 1/8 G2 Autoloaders. With Command View TL monitor backup logs, check drive status, receive trouble alerts, diagnose problems, and much more — through a simple browser interface from anywhere in the world. Set up and configure your FC or SAS attached autoloader in less than two hours with configuration wizards and graphical interface: • Select from a list of multiple supported libraries to manage • View asset information for the library system • View health summaries for all components of the library system • View library inventory: slots, media, and drives • Search for media by barcode label • View details on drives and robotics, including WWNs, speeds, and connection types • Configure hosts/HBA-to-drive mapping and masking settings with Secure Manager • Automatically discover hosts and HBAs on the SAN or add your own for access control and security purposes • Upgrade firmware on all library components • Configure SNMP and email trap/event destinations to receive alerts asynchronously • View persistent event logs for the library system Additional information on Command View for Tape Libraries can be found at: http://www.hpe.com/storage/commandview. |
TapeAssure Advanced | The 1/8 G2 Autoloader is available with HPE StoreEver TapeAssure Advanced – complete tape infrastructure analytics software designed to reduce unscheduled backup downtime, mitigate the risks in hardware failures and increase the return on investment through higher asset utilization. HPE StoreEver TapeAssure Advanced Software provides an intuitive, easy to use dashboard, and advance analytics feature for performance, health and utilization related to tape drives and cartridges. TapeAssure Advanced Software is integrated into HPE StoreEver Command View TL Software for single pane of glass management, monitoring and analytics. TapeAssure Advanced Software provides a dashboard display with pie charts, live and historical graphs for performance, health and utilization data, and highlights issues in the tape infrastructure. Advanced analytics feature makes use of predictive analytics to forecast the likelihood of failures, bottlenecks and load balancing issues in the tape infrastructure. It has unique capabilities of analytics around drive and library health and life as well as cartridge health and life. Analysis of drive/tape utilization forecast helps to plan hardware investments in a better way. Additional information on Tape Assure Advanced can be found at: http://www.hpe.com/storage/tapeassure NOTE: HPE StoreEver TapeAssure Advanced Software is licensed by tape library; one license is required for each tape library. |
Data Verification | HPE StoreEver Data Verification Software provides the ability to periodically scan and validate the quality of data on LTO tape cartridges stored in a tape backup or archive. Periodically scanning infrequently accessed tapes stored in a vault or inside a tape library to verify the data integrity so that a successful restore is possible when that critical business data is needed. StoreEver Data Verification Software is fully integrated into the HPE StoreEver Command View Tape Library Software and TapeAssure Advanced Software providing single pane of glass management, multi-library manageability, and proactive notification of health, usage, and life of the library, media, and tape drives. Key Features: • Periodically scan infrequently accessed LTO tapes to verify health of tape cartridges as well as the data stored on those tapes. • Improve reliability and reduce the risk of restore failure • Flexible policy based scan to verify data is healthy and accessible. • Scanning without interrupting host applications. • Protect all tape cartridges, active and vaulted archived media, with the same license. • Receive proactive notification for needed media migration. • Fully integrated with Command View Tape Library Business Benefits: • Ensures critical business data can be restored when most needed • High Availability – No impact to backup operations • Ease of Use – Single license for media in and out of the library • Save Money – Migrate data only when needed Additional information on Data Verification can be found at: http://www.hpe.com/storage/dataverification |
Proven Reliability | With a rating of 2,000,000 robot load/unload cycles, the 1/8 G2 Tape Autoloader provides necessary high reliability for today’s demanding environment. To improve reliability and longevity, all HPE Ultrium products feature Data Rate Matching (DRM). This allows the tape drive to dynamically adjust the speed of the drive down to one-third the native transfer rate of the tape drive to match the speed of the host.. This increases performance, reduces mechanical wear on the tape drive, and extends tape life. |
Longevity | Organizations need to be confident that their data in archive is still there when they need it. LTO tape media is specified with a 30 year shelf life in normal ambient conditions. |
Disaster Recovery and Security | Removable media also has the advantage that data is held ‘offline’ which means that archive data on tape has the additional level of protection from the threats to on-line data from viruses, hackers and cyber-attacks. All Ultrium tape drives (since generation 4) include hardware based data encryption to prevent unauthorized access to data at rest and cartridges are available with write-once-read-many (WORM) capability to prevent accidental overwriting of data archived on the tape. Both WORM and hardware data encryption features help organizations to comply with increased data security regulations. |
Encryption | The HPE 1/8 G2 Tape Autoloader offers multiple options for data encryption, depending on the requirements for policy, regulation, compliance, and centralized key management.
Protect the confidentiality and integrity of your data: The encryption kit includes two USB key server tokens, product documentation, and firmware support. One encryption kit is needed per library or autoloader and it must be physically accessible so that the USB token can be inserted into the automation device. One of the two tokens will plug into the USB port in the autoloader or library and will generate and maintain encryption keys for the LTO-7, LTO-6, LTO-5 and LTO-4 drives/libraries. The USB key server token uses a hardware random number generator, password authentication, and digital envelopes for strong encryption keys and security operations. The encryption kit provides a self-contained solution for autoloaders and MSL libraries with no additional software, PCs, or servers required or involved. Protect critical data across an enterprise: To meet requirements for larger scale encryption key managers, the HPE 1/8 G2 Tape Autoloader supports KMIP 1.2 compliant key managers. With the purchase of the KMIP Encryption License, the 1/8 G2 Tape Autoloader and MSL libraries will be able to request encryption keys from KMIP 1.2 compliant key managers, for data encryption and key management. For more information on all supported key management servers, please visit: http://www.hpe.com/storage/DAPRcompatibility |
LTO Ultrium Technology | HPE LTO (Linear Tape Open) Ultrium Tape Drives use best of breed technology. By taking the best features from other tape technologies and combining them into a single new technology, Ultrium tape drives are in a league of their own. The LTO Ultrium specification is an industry standard format; thus data written on HPE Ultrium Tape Drives can be interchanged directly with Ultrium Tape Drives from other vendors. |
Investment protection | HPE LTO tape drives and automation products are founded on the LTO open standard and adhere to the published LTO format roadmap to Generation 10. The ability to read back two generation and read/write back one generation of media, assures LTO customers’ investment protection. |
Data Rate Matching | Data Rate Matching combines sophisticated buffer management with variable tape drivemotor speeds to match the tape drive transfer rate to the host output. . This feature ensures that the tape drive continues to stream data regardless of the environment, and brings three big advantages:
| |||||||||||||
| ||||||||||||||
HPE Ultrium WORM | Critical to the success of data retention policies in highly regulated environments is the ability to store and manage data in an unalterable state. Following stringent guidelines set forth by regulatory agencies such as the SEC and HIPPA, IT organizations must now integrate new solutions and policies that can verify the integrity of stored data for periods that can extend well beyond seven years. Every generation of LTO Ultrium since LTO-3 tape drives feature the ability to archive and store data in a read-only, non-rewriteable format that meets the most stringent regulatory guidelines. Using a combination of integrated fail-safe features in the drive firmware, cartridge memory, and tape formatting, LTO Ultrium provides the ability to archive large amounts of data for periods of up to 30 years in a secure, untampered state. Ultrium tape drives include support for both rewritable and WORM media providing for a secure, long-term archiving solution into any data protection strategy. LTO Ultrium WORM provides the following advantages:
NOTE: While all HPE LTO-7, LTO-6, LTO-5, and LTO-4 Ultrium tape drives support LTO Ultrium WORM media, some third, fourth and fifth-generation LTO Ultrium tape drives from other manufacturers may not include read and write support for LTO Ultrium WORM media. For non-HPE third- and fourth-generation LTO Ultrium tape drives, please check the manufacturers’ specifications to ensure this support is provided if you are using your WORM media. If WORM support is not provided, the drive will eject the WORM tape cartridge immediately upon insertion into to the tape drive. |
HPE Library and Tape Tools | The 1/8 G2 Tape Autoloader is supported on The Hewlett Packard Enterprise industry-leading diagnostic tool – HPE Library and Tape Tools (L&TT). L&TT is a single, convenient program that’s a snap to install and simple to operate. L&TT’s intuitive user interface eliminates the need for training and deploys in less than five minutes. This robust diagnostic tool is designed for both the experienced professional and the untrained administrator. It ensures product integrity through self-diagnostics and fast resolution to device concerns. Additional information on L&TT plus download information can be found at: http://www.hpe.com/support/tapetools. |
HPE Storage Media | Hewlett Packard Enterprise recommends that you use Hewlett Packard Enterprise cartridges in the 1/8 G2 Tape Autoloader to assure the highest level of protection for your valuable data. The test program for HPE media is the most thorough and comprehensive in the industry. All HPE cartridges must satisfy an exhaustive battery of additional tests that relate directly to real life situations, where real data and real businesses are at stake. The benefit of the Hewlett Packard Enterprise brand specification for media is consistent quality. Through the testing of thousands of HPE drives and HPE cartridges, the ideal formulation for backup performance is defined and then continuously monitored. This hugely resource-intensive process is unique to Hewlett Packard Enterprise and affords deep insight into the HPE backup solution for a wide range of environments and duty cycles. Your best choice for ease of support and maximum dependability is to use HPE-branded Ultrium cartridges at all times. |
Factory Express Portfolio for Servers and Storage | HPE Factory Express offers configuration, customization, integration and deployment services for HPE servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Customization must comply with all relevant product specifications and factory supported configurations. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. Type of service support varies by platform and product family. For more information on Factory Express services for your specific server model or storage device please contact your sales representative or go to: http://www.hpe.com/info/factoryexpress. |
Compatibility
Compatibility | The Hewlett Packard Enterprise extensive compatibility testing program assures that your HPE 1/8 G2 Tape Autoloader works with leading servers, operating systems, and backup applications – and not just those sold by HP. The 1/8 G2 Tape Autoloader works seamlessly in many environments, making them especially suitable if you have a mixed system environment. For the latest list of servers, workstations, operating systems, and backup software that support the 1/8 G2 Tape Autoloader, reference the HPE Data Agile DAPR Compatibility Matrix (Formerly EBS) at: http://www.hpe.com/storage/DAPRcompatibility . NOTE: The 1/8 G2 Tape Autoloader requires an HBA with multiple LUN support and should not be used with RAID or Array controllers |
Server Compatibility | The 1/8 G2 Tape Autoloader is supported on a wide range of HPE systems. For details of which 1/8 G2 Tape Autoloader works with which systems, including third-party systems, reference the HPE Data Agile DAPR Compatibility Matrix (Formerly EBS) at: http://www.hpe.com/storage/DAPRcompatibility for the latest hardware compatibility information. |
OS Support | Reference the HPE Data Agile DAPR Compatibility Matrix (Formerly EBS) for the most up-to-date OS compatibility information at: http://www.hpe.com/storage/DAPRcompatibility. |
Software Support | Reference the HPE Data Agile DAPR Compatibility Matrix (Formerly EBS) for the most up-to-date software compatibility information at: http://www.hpe.com/storage/DAPRcompatibility. |
Service and Support, HPE Care Pack, and Warranty Information
Warranty | The warranty for this product consists of 1-year parts exchange, next business day. |
For increased uptime, productivity and ROI, HPE Care Pack packaged services for Storage These days, you need to get the most out of your storage investment-you can’t afford not to. When you buy HPE storage products and solutions, it’s also a good time to think about what levels of service and support you may need. To help take the worry out of deploying, designing, maintaining, and managing your environment, we’ve designed a portfolio of service options that are as: flexible, reliable and scalable as your storage. Unlike storage-only vendors, we take a holistic approach to your entire environment, bridging storage, servers, blades, software and network infrastructures with our HPE Care Pack packaged services for Storage.Protect your business beyond the warranty When it comes to robustness and reliability, standard warranties on today’s computing equipment have matured just as the technologies have matured. Good news on some fronts-but also a source of potential problems and subsequent consequences that come from depending on standard warranties alone. Standard warranty protects against product defects and some causes of downtime- but not the business. By using a standard approach to warranty uplifts, such as HPE Care Pack Services, you can reduce downtime risks and be more certain of operational consistency for both mission-critical and standard business computing. Simply put, HPE Care Pack Services normalize the warranty of combined products – helping you proactively guard against unplanned downtime.Extending warranties with HPE Care Pack Services For cost-effective upgrading or extending your standard warranty, HPE Care Pack Services offer a suite of standard reactive hardware and software support services that are sold separately, or combined as with our Support Plus and Support Plus 24 services. The portfolio also provides a combination of proactive and reactive services, such as Proactive 24 Service and Critical Service. In addition, with HPE Proactive Select we offer an innovative approach to service delivery that gives you the flexibility to acquire the specific proactive services you need today, then add services as your needs evolve. HPE Proactive Select offers a broad set of technical or per-event type service options – including server, storage, and network, SAN device, and software, environment, installation and education services. Services that you can mix and match depending on your specific requirements, from preliminary planning and equipment delivery to installation, configuration, integration, and testing, through every level of ongoing support. Our HPE Care Pack packaged services for Storage assures help when you need it most. And for many products, post-warranty HPE Care Pack Services are available when your original warranty has expired. HPE Storage Services: Offering reliability, flexibility and value-just like your storage HPE Storage Services, the trusted business technology experts who manage your technology in action, because when technology works, business works. http://www.hpe.com/services/storage NOTE: Care Pack Services availability may vary by product and country. HPE Care Pack Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise Authorized Service Partners:
| |
Recommended HPE Care Pack Services for optimal satisfaction with your HPE product. | |
Recommended Services | HPE Foundation Care 24×7 connects you to HPE 24 hours a day, seven days a week for assistance on resolving issues – hardware onsite response within four hours and software call back within two hours after opening your case. Three years’ coverage recommended with HPE Care Pack Service. |
HPE Install Storage Autoloader/Tape Drive Array Service For smooth startup and better business outcomes, HPE Install Storage Autoloader/Tape Drive Array Service- this service provides initial hardware installation into your server technology environment (system configuration is not included). Leverage the full strength of HPE Technology Services – customers can trust the services professionals at Hewlett Packard Enterprise to work collaboratively with them, putting our strategic and technical know-how to work across their entire infrastructure.
| |
HPE Proactive Select Service Hewlett Packard Enterprise Proactive Select Service improves your IT performance and manageability through the use of cost effective flexible services. Hewlett Packard Enterprise provides technical expertise and best practices to accelerate ROI of your technology investment. Selectable proactive services span a wide range of technology and process services – a flexible way to purchase proactive services that fit your particular environment and situation. Hewlett Packard Enterprise Proactive Select Service is technology agnostic and purchased in addition to your choice of underlying reactive support.
| |
eSupport | HPE eSupport is a portfolio of technology-based services that assist you with managing your business environment – from the desktop to the data center. Support Portal Features include:
Access to certain features of the support portal requires a Hewlett Packard Enterprise service agreement. To access the support portal, visit http://www.hpe.com/support |
Customer Technical Training | Consider education as an integral part of your strategy to get the best return on investment for your HPE storage solution. Hewlett Packard Enterprise offers a variety of training courses on storage software, networking, archiving and disk storage systems. Our classes are available in many delivery modalities from traditional instructor-led courses at one of our 80 training centers worldwide to on-site training customized to your needs or online |
HPE Services Awards | HPE Services continues to be recognized for service and support excellence by customers, partners, industry organizations and publications around the world. Recent honors and award reflect our services team’s dedications, technical expertise, professionalism and uncompromising commitment to customer satisfaction. For a list of all our awards. |
Additional Services Information | For more information about HPE Care Pack Services for Storage, please visit: http://www.hpe.com/services/storage |
If you have specific questions, contact your local Hewlett Packard Enterprise representative. Contact information for a representative in your area can be found at “Contact HPE” http://www.hpe.com |
Bạn vui lòng nhập đúng số điện thoại để chúng tôi sẽ gọi xác nhận đơn hàng trước khi giao hàng. Xin cảm ơn!