HPE ProLiant DL380 Gen10 Server

(8 SFF, 6SFF+2NVMe or 8 NVMe PCIe SSD optional)

Notes: ¹ Networking Choice (NC) models do not include an embedded NIC and have a FlexibleLOM pre-selected for Build-to-Order (BTO) models; Configure-to-Order (CTO) models require a primary networking choice of FlexibleLOM or select networking adapters NIC adapters. See “FlexibleLOM Adapters” and/or “HPE Networking” sections for available options.

Notes: ¹ Networking Choice (NC) models do not include an embedded NIC and have a FlexibleLOM pre-selected for Build-to-Order (BTO) models; Configure-to-Order (CTO) models require a primary networking choice of FlexibleLOM or select networking adapters NIC adapters. See “FlexibleLOM Adapters” and/or “HPE Networking” sections for available options.

· New Read-Intensive SFF Value SAS SSD (960GB/1.92TB/3.84TB/7.68TB)

· New Mixed-Use SFF Value SAS SSD (960GB/1.92TB/3.84TB)

· New Mixed-Use LFF Value SAS SSD (1.92TB)

· New HPE 32GB 1Rx4 DDR4-2933 Registered Memory Kit (P38466-B21)

· New HPE Trusted Supply Chain/HPE ProLiant DL380T Gen10 (P36394-B21)

Form Factor

· 2U rack

Chassis Types

· 8 SFF with optional Universal Media Bay, and optional SFF or NVMe drive bay options

· 24 SFF bay with additional 6SFF rear drive bay option to total 30 SFF drives

· 8 LFF with Universal Media Bay

· 12 LFF with optional 4 LFF mid-plane and optional 3LFF + 2 SFF rear drive bay to total 19 LFF drives + 2 SFF drives

Notes:

­  The 3 LFF rear drive box will consume space for the secondary and tertiary riser.

­  The 8 and 12 LFF chassis also supports the 2 SFF rear drive box which allows for the user to attach a secondary or tertiary riser.

­  The 8 NVMe drive option (826689-B21) can only be leveraged in the SFF chassis and replaces Box 1, 2 or 3, however there is a maximum of 20 NVMe drives supported with Partial population of Box 1.

­  The Premium cage (826690-B21, 6 SAS/SATA+2 NVMe) can only be leveraged in the SFF chassis and replaces Box 1, 2 or 3.

­  The Universal Media Bay (826708-B21) not available with the LFF chassis or the 24 SFF front end, and can only be populated in Box 1.

­  The 8 SFF can be upgraded with additional 8SFF drive box to total 16 or 24 SFF drives. For optimal upgrade Box 2 should be populated second, with Box 1 the last to be populated for a field upgrade to 24 SFF. For CTO builds requiring 24 SFF please use the 24 SFF chassis (868704-B21). Note a field upgrade to 24 SFF will require a High Performance fan kit (867810-B21).

­  The 8 LFF chassis cannot be upgraded to 12 LFF front in the field; however the 4-LFF Mid plane (826686-B21) is supported, but will also require a performance fan kit (867810-B21).

­  The 8LFF chassis ships with 6-standard fans.

­  All models come with the S100i Smart Array Controller with embedded software RAID support for 12 drives. The S100i uses 14 embedded SATA ports, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2 options on the primary riser.

System Fans

· Standard – fan types included

Notes:

– 1P models typically ship with 4 standard fans. The second processor option kit contains 2 additional fans. 1P Models have (4) (N+1 redundancy standard).

– 2P models typically ship with 6 standard fans. 2P Models have (6) (N+1 redundancy standard).

– The 12 LFF and 24 SFF chassis ship with 6 High performance fans as standard.

– The 8LFF chassis ships with 6 standard fans as standard.

– High performance fan kit is available to meet ambient temperature environments.

– High performance fan kits are required for rear drives, Graphics (GPU) card or NVMe configurations.

The 2nd digit of the processor model number “x1xx” and “x2xx” is used to denote the processor generation (i.e. 1=1st generation and 2=2nd generation)

Notes: Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

“U” processors (i.e. 6212U) only supported in single socket configurations

For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.

This table covers the public Intel offering only.

Notes: More than 1.5 TB memory per socket requires memory higher than 128 GB capacity

­ Platinum – 8200 Series – 2 Socket supports supports 6-Channel DDR4 @ 2933 MT/s providing up to 1TB memory capacity per socket (up to 2TB/socket on M series and up to 4.5TB/socket on L series); Intel Optane Persistent Memory for HPE (select skus), Vector Neural Network Instructions (VNNI) for inference acceleration, Intel Turbo Boost Technology, Intel Hyper-Threading Technology Intel AVX-512 (2x 512-bit FMA). 48 lanes PCIe 3.0, advanced RAS

­  Processors with 130W TDP or higher and the 8256, 8156, 6128, 5222, and 5122 will ship with the High Performance heatsink. All other will processors will ship with the Standard heatsink.

Notes:

­  Platinum – 8100 Series –2 Socket supports 2UPI, supports 6-Channel DDR4 @ 2666 MT/s providing up to 768GB memory capacity (1.5 TB on select processor skus). Intel Turbo Boost Technology, Intel Hyper-Threading Technology supported. Intel AVX-512 (2x 512-bit FMA), 48 lanes PCIe 3.0, advanced RAS.

­  Processors with 130W TDP or higher and the 8256, 8156, 6128, 5222, and 5122 will ship with the High Performance heatsink. All other will processors will ship with the Standard heatsink.

Notes:

­  ¹ Gold Processor 5222 supports 2933 DDR4 and 2 512-bit FMA units

­  ² Gold Processor 5218B has consistent features with the 5218 processor but is from a different die. Mixing both 5218B & 5218 in a system is not supported

­  ³ Gold Processor 5218N processor available April 2019, Intel® Speed Select Technology-Base Frequency enablement via System ROM upgrade targeting June 2019

­  Processors with 130W TDP or higher and the 8256, 8156, 6128, 5222, and 5122 will ship with the High Performance heatsink. All other processors will ship with the Standard heatsink.

­  ⁴ Configuration support and facilities-requirements matrix for Gold Processor 6256 and Gold Processor 6250 listed below:

Notes: ¹Must install DDR4 DIMM blanks (P07818-B21) on all empty DIMM slots

Notes:

­ Gold – 6200 & 5200 Series – 6-Channel DDR4 @ 2933 MT/s (6200 & 5222 skus only)  or 2666 MT/s (all Gold 5200 skus except 5222 @ 2933 MT/s); providing up to 1TB memory capacity per socket (up to 2TB/socket on M series and up to 4.5TB/socket on L series); Support for Intel Optane Persistent Memory for HPE (select skus), Vector Neural Network Instructions (VNNI) for inference acceleration.

­  Intel Turbo Boost Technology, Intel Hyper-Threading Technology Intel AVX-512 (2x 512-bit FMA for 6200 series and 5222; 1 x 512-bit FMA for 5200 series, except for 5222) 48 lanes PCIe 3.0, advanced RAS

­  Gold – 5100, 6100 Series – 2 Socket supports 2UPI, supports 6-Channel DDR4 @ 2400 MHz (SKU 5122=supports 2666) providing up to 768GB memory capacity (1.5 TB on select skus).  Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA)  (SKU 5122 supports 2x 512 bit FMA), 48 lanes PCIe 3.0, advanced RAS supported.

­  Processors with 130W TDP or higher and the 8256, 8156, 6128, 5222, and 5122 will ship with the High Performance heatsink. All other will processors will ship with the Standard heatsink.

Notes: ⁴  Silver Processors 4215R and 4215 support Intel Optane Persistent Memory for HPE

Notes:

­  Silver – 4200 Series – 6-Channel DDR4 @ 2400 MT/s, providing up to 1TB memory capacity per socket; Support for: Intel® Vector Neural Network Instructions (VNNI) for inference acceleration; Intel Turbo Boost Technology, Intel Hyper-Threading Technology Intel AVX-512 (1x 512-bit FMA).48 lanes PCIe 3.0, standard RAS

­  Silver – 4100 Series – 2 Socket supports 2UPI @ 9.6 GT/s, 6-Channel DDR4 @ 2400 MHz providing up to 768 GB memory capacity. Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA), 48 lanes PCIe 3.0, standard RAS supported.

Notes: Bronze – 3200 Series – 6-Channel DDR4 @ 2133 MT/s, providing up to 1TB memory capacity per socket; Support for: Intel® Vector Neural Network Instructions (VNNI) for inference acceleration; Intel AVX-512 (1x 512-bit FMA); 48 lanes PCIe 3.0, standard RAS

Notes: Bronze – 3100 Series – 2 Socket supports 2UPI @ 9.6 GT/s, supports 6-Channel DDR4 @ 2133 MHz providing up to 768GB memory capacity. Intel AVX-512(1x 512-bit FMA), 48 lanes PCIe 3.0, standard RAS supported.

Intel C621 Chipset

For more information regarding Intel® chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/

HPE iLO 5 ASIC

Read and learn more in the iLO QuickSpecs.

One of the following depending on model.

Notes:

­  Intel Optane Persistent Memory for HPE only supported with select 2nd generation Intel Xeon Scalable Series Processors ONLY (82xx/62xx/52xx/4215R/4215)  and can only be mixed with either RDIMMs or LRDIMMs.

­  HPE NVDIMMs are only supported on 1st generation Intel Xeon Scalable Series Processors and can only be mixed with RDIMMs.

­  Maximum memory per socket is dependent on processor selection. 2^nd generation processors supporting 2 TB or 4.5 TB per CPU are indicated by the “M” and “L” in the processor model names (i.e. 8276M and 8276L). 1^st generation processors supporting 1.5 TB per CPU are indicated by the “M” in the processor model names (ie 8160M)

­  Maximum memory per socket is dependent on processor selection. Processors supporting 1.5 TB per CPU is indicated by the “M” in the processor model names (i.e. 8160M).

­  Mixing of RDIMM and LRDIMM memory is not supported.

­  For General Server Memory and HPE NVDIMM Population Rules and Guidelines for Gen10 see details here:

http://www.hpe.com/docs/memory-population-rules

­  For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/memory-speed-table

­  To realize the performance memory capabilities listed in this document, HPE DDR4 SmartMemory is required.

­  For additional information, please see the HPE DDR4 SmartMemory QuickSpecs.

For details on the HPE Server Memory Options RAS feature, visit: http://www.hpe.com/docs/memory-ras-feature

Notes:

­  Bus Width Indicates the number of physical electrical lanes running to the connector.

­  The specifications above correspond with the default primary riser which also supports dual m.2 cards. Additional Primary Riser options and specifications noted in the “Riser Information” table within this document.

Notes:

­  Bus Width Indicates the number of physical electrical lanes running to the connector.

­  The Secondary Riser requires Processor 2 to be populated 870548-B21

­  The specifications above correspond with the x8/x16/x8 Secondary Riser Kit (870548-B21). Additional Secondary Riser options and specifications noted in the “Riser Information” table within this document.

Notes:

­  Bus Width Indicates the number of physical electrical lanes running to the connector.

­  The Tertiary Riser requires Processor 2 to be populated

­  The specifications above correspond with the 2×8 Tertiary Riser Kit (875780-B21). Additional Tertiary Riser options and specifications noted in the “Riser Information” table within this document

Integrated Video Standard

· Video modes up to 1920 x 1200@60Hz (32 bpp)

· 16MB Video Memory

HPE iLO 5 on system management memory

· 32 MB Flash

· 4 Gbit DDR 3 with ECC protection

Notes:

­  2x m.2 drives are supported on the Primary Riser.

­  UFF drives are also supported.

One of the following depending on model

· Optical Drive

Ships standard in Performance Models

Optional: DVD-ROM, DVD-RW

· Hard Drives

None ship standard

· HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

Notes: Available in 94% efficiency.

· HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

Notes:

­  Available in 94% and 96% efficiency.

­  Also available in -48VDC and 227VAC/380VDC power inputs.

· HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

Notes:

­  Available in 94% efficiency.

­  Also available in -48VDC

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to “right-size” a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid “trapped” power capacity in the data center.

All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page. o review the power requirements for your selected system, please use the HPE Power Advisor Tool.

For information on power specifications and technical content visit HPE Server power supplies.

The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.

One of the following depending on model

Software RAID

· HPE Smart Array S100i SR Gen10 SW RAID

Notes:

­ HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.

­ HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.

­ The S100i uses 14 embedded SATA ports, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2 options on the primary riser. If more than 8 SATA devices are being supported on this controller, then a Qty=1 of the SAS 3POS Cable Kit (826709-B21) is required.

­ The S100i supports Windows only

­ For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot volume. For more information visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/

Essential RAID Controller

· HPE Smart Array E208i-a SR Gen10 Controller

· HPE Smart Array E208i-p SR Gen10 Controller

· HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID Controller

· HPE Smart Array P408i-a SR Gen10 Controller

· HPE Smart Array P408i-p SR Gen10 Controller

· HPE Smart Array P408e-p SR Gen10 Controller

· HPE Smart Array P816i-a SR Gen10 Controller

Notes:

­  Performance RAID Controllers require the HPE Smart Hybrid Capacitor (P02377-B21) or the HPE Smart Storage Battery (P01366-B21) which are sold separately.

­  For additional details, please see HPE Smart Array Gen10 Controllers Data Sheet.

2^nd Generation Intel® Xeon® Scalable Processor Family

· Windows Server 2019: Essentials, Standard, Datacenter

· Windows Server 2016: Essentials, Standard, Datacenter

· Windows Server 2012 R2: Essentials, Standard, Datacenter

· Microsoft Hyper-V Server: 2012 R2, 2016 & 2019

· VMware vSphere 6.0 U3, 6.5 U2 through U.3 & 6.7 U1 through U3, 7.0

Notes: 6.5 U3, 6.7 U3 & 7.0  minimums for Xeon “R”, Gold 6256, Gold 6250L & Gold 6250 processors.

· ClearOS: 7.6; ClearVM: 2.0

· Red Hat Enterprise Linux (RHEL) 7.6 w/ Kbase**, 8.0

· SUSE Linux Enterprise Server (SLES) 12 SP3, 15 (includes Xen) **

Notes:

– SLES12 SP4 is the minimum for servers featuring Intel® Optane™ DC Persistent Memory.

– Ubuntu: 18.04 LTS (4.15.0)

– Oracle Linux: Oracle Linux 7.6 UEK Release 5 Update 2; Oracle VM 3.4.6 (UEK Release 4 Update 7)

– Citrix: Hypervisor: 8,0, 8.1, 8.2; XenServer 7.1, 7.4, 7.5, 7.6

1st Generation Intel® Xeon® Scalable Processor Family

· Windows Server 2019: Essentials, Standard & Datacenter

· Windows Server 2016 : Essentials, Standard & Datacenter

· Windows Server 2012 R2: Essentials, Standard & Datacenter

· Micrsoft Hyper-V Server: 2012 R2, 2016 & 2019

· VMware vSphere 6.0 U3, 6.5 through U.3 & 6.7 through U3, 7.0

· ClearOS: 7.6; ClearVM: 2.0

· Red Hat Enterprise Linux (RHEL) 6.9, 7.3 **

· SUSE Linux Enterprise Server (SLES) 11 SP4, 12 SP2 & 15 (includes Xen) **

· Ubuntu: 16.04.3 HWE (4.10), 18.04 LTS (4.15.0)

· Oracle Linux: Oracle Linux/UEK 6.9, 7.4; Oracle VM 3.4.4

· Citrix: Hypervisor: 8,0, 8.1, 8.2; XenServer 7.1, 7.4, 7.5, 7.6

Notes:

– For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server http://www.hpe.com/info/ossupport

– ** 64-bit only;includes KVM

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.

Notes: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

· Secure Boot and Secure Start enable for enhanced security

· Embedded UEFI Shell

· Operating system specific functionality

· Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant

· Support for > 2.2 TB (using GPT) boot drives

· PXE boot support for IPv6 networks

· USB 3.0 Stack

· Workload Profiles for simple performance optimization

· iSCSI Software Initiator Support.

· NVMe Boot Support

· HTTP/HTTPs Boot support as a PXE alternative.

· Platform Trust Technology (PTT) can be enabled.

· Boot support for option cards that only support a UEFI option ROM

Notes:

­  For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.

­  UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE ProLiant Gen10 Server.

· ACPI 6.1 Compliant

· PCIe 3.0 Compliant

· WOL Support

· Microsoft® Logo certifications

· PXE Support

· VGA/Display Port

Notes: This support is on the optional Universal Media Bay.

· USB 3.0 Compliant (internal)

· USB 2.0 Compliant (external ports via SUV)

Notes: This support is on the optional Universal Media Bay.

· Energy Star

· SMBIOS 3.1

· Redfish API

· IPMI 2.0

· Secure Digital 4.0

· TPM 1.20 and 2.0 Support

· Advanced Encryption Standard (AES)

· Triple Data Encrytion Standard (3DES)

· SNMP v3

· TLS 1.2

· DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)

· Active Directory v1.0

· ASHRAE A3/A4

Notes: For additional technical, thermal details regarding ambient temperature, humidity, and feature support, please visit http://www.hpe.com/servers/ashrae

· EU Lot9

Notes: European Union (EU) eco-design regulations for server and storage products, known as Lot 9, go into effect on March 1st, 2020. Among other requirements, for servers this directive establishes power thresholds for idle state, as well as efficiency and performance in active state which vary among configurations. HPE ProLiant Gen10 servers are compliant with Lot9 requirements.

Please visit: https://www.hpe.com/us/en/about/environment/msds-specs-more.html for more information regarding HPE Lot 9 conformance.

· UEFI (Unified Extensible Firmware Interface Forum) 2.6

Notes: UEFI is the default for the DL380 Gen10. Legacy mode can be selected in the field or as a CTO option (758959-B22); some configuration restrictions apply.

HPE Integrated Lights-Out (HPE iLO)

Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO.

Learn more at http://www.hpe.com/info/ilo.

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI).

Learn more at http://www.hpe.com/servers/uefi.

Intelligent Provisioning

Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning.

Learn more at http://www.hpe.com/servers/intelligentprovisioning..

iLO RESTful API

iLO RESTful API is Redfish API conformance and offers  simplified server management automation such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi

Active Health System

The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers.  Learn more at http://www.hpe.com/servers/ahs.

Active Health System Viewer

Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE self-repair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv.

Smart Update

Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP).

iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at unmatched speed and scale.  Use with an iLO Advanced License to unlock full capabilities.

Learn more at http://www.hpe.com/servers/iLOamplifierpack.

HPE iLO Mobile Application

Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp.

RESTful Interface Tool

RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.

Scripting Tools

Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/powershell.

HPE OneView Standard

HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview.

Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates.  Learn more at http://www.hpe.com/info/hpesim.

· UEFI Secure Boot and Secure Start support

· Tamper-free updates – components digitally signed and verified

· Immutable Silicon Root of Trust

· Ability to rollback firmware

· FIPS 140-2 validation

· Secure erase of NAND/User data

· Common Criteria certification

· TPM (Trusted Platform Module) 1.2 option

· Configurable for PCI DSS compliance

· TPM (Trusted Platform Module) 2.0 option

· Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser

· Bezel Locking Kit option

· Support for Commercial National Security Algorithms (CNSA)

· Chassis Intrusion detection option

· Secure Recovery – recover critical firmware to known good state on detection of compromised firmware

This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at:

http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.

HPE iLO Advanced

HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management functionality.

HPE OneView Advanced

HPE OneView brings a new level of automation to infrastructure management by taking a template driven approach to provisioning, updating, and integrating compute, storage, and networking infrastructure. It provides full-featured licenses which can be purchased for managing Gen8, Gen9 and Gen10 servers.

To learn more visit http://www.hpe.com/info/oneview.

HPE InfoSight for Servers

HPE InfoSight for Servers combines the cloud-based machine learning of InfoSight with the health and performance monitoring of Active Health System (AHS) and iLO to optimize performance and predict and prevent problems. The end result is an intelligent environment that modernizes IT operations and enhances the support experience by predicting and preventing the infrastructure issues that lead to application disruptions, wasted IT staff time and missed business opportunities.

Learn more at https://www.hpe.com/servers/infosight

HPE Insight Cluster Management Utility (CMU)

HPE Insight Cluster Management Utility is a HyperScale management framework that includes software for the centralized provisioning, management and monitoring of nodes and infrastructure. Learn more at http://www.hpe.com/info/cmu.

Hewlett Packard Enterprise supports various accelerators on select HPE Proliant servers to support different workloads. The accelerators enable seamless integration of GPU computing with HPE ProLiant servers for high-performance computing, large data center graphics, deep learning and virtual desktop deployments. These accelerators deliver all of the standard benefits of GPU computing while enabling maximum reliability and tight integration with system monitoring and management tools such as HPE Insight Cluster Management Utility.

SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require “custom” rack configuration or configuration for products not available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an Authorized Partner for assistance. https://h22174.www2.hpe.com/SimplifiedConfig/Welcome#

The story may end with servers, but it starts with the foundation that makes compute go – and business grow. We’ve reinvented our entire portfolio of rack and power products to make IT infrastructure more secure, more practical, and more efficient. In other words, we’ve created a stronger, smarter, and simpler infrastructure to help you get the most out of your IT equipment. As an industry leader, Hewlett Packard Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management and system access.

HPE G2 Advanced and Enterprise Racks are perfect for the server room or today’s modern data center with enhanced airflow and thermal management, flexible cable management, and a 10 year Warranty to support higher density computing.

HPE G2 PDUs offer reliable power in flexible form factors that operate at temperatures up to 60°C, include color-coded outlets and load segments and a low-profile design for optimal access to the rack and support for dense rack environments.

HPE Uninterruptible Power Systems are cost-effective power protection for any type workload. Some UPSs include options for remote management and extended runtime modules so you’re critical dense data center is covered in power outages.

HPE KVM Solutions include a console and switches designed to work with your server and IT equipment reliably. We’ve got a cost-effective KVM switch for your first rack and multiple connection IP switches with remote management and security capabilities to keep your data center rack up and running.

Learn more about HPE Racks, KVM, PDUs and UPSs at HPE Rack and Power Infrastructure.

Protect your business beyond warranty with HPE Pointnext Operational Service

HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional, and Operational Services to help accelerate your digital transformation. From the onset of your transformation journey, Advisory and Transformational Services focus on designing the transformation and creating a solution roadmap. Professional Services specializes in creative configurations with flawless and on-time implementation, and on-budget execution.  Finally, operational services provides innovative new approaches like Flexible Capacity and Datacenter Care, to keep your business at peak performance. Hewlett Packard Enterprise is ready to bring together all the pieces of the puzzle for you, with an eye on the future, and make the complex simple.

Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard Enterprise. Achieve up to 77%¹ reduction in down time, near 100%² diagnostic accuracy and a single consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and increase optimization. All of these benefits are already available to you with your server storage and networking products, securely connected to HPE support.

Notes:

­  ¹ IDC

­  ² HP CSC reports 2014 – 2015

Learn more about getting connected at http://www.hpe.com/services/getconnected.

HPE Proactive Care* with 6 hour call-to-repair commitment, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive reports with recommendations and advice. This Service combines three years’ proactive reporting and advice with our highest level of hardware support – the HPE 24×7, six hour hardware call-to-repair. Hewlett Packard Enterprise is the only leading manufacturer who makes this level of coverage available as a standard service offering for your most valuable servers. This service also includes collaborative software support for Independent Software Vendors (ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

HPE Proactive Care* with 24×7 coverage, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive reports with recommendations and advice This Service combines three years proactive reporting and advice with our 24×7 coverage, four hour hardware response time when there is a problem. This service also includes collaborative software support for Independent Software Vendors (ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

HPE Proactive Care* – Next Business Day service, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive reports with recommendations and advice. This service combines three years of Hardware Support where a Hewlett Packard Enterprise authorized representative will arrive at the Customer’s site during the onsite coverage window to begin hardware maintenance service the next coverage day after the service request has been logged. This service also includes collaborative software support for Independent Software Vendors (ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

Notes: *HPE Proactive Care and HPE Proactive Care Advanced require that the customer connect their devices to make the most of these services and receive all the deliverables.

HPE Server Hardware Installation

Provides for the basic hardware installation of HPE branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.

https://h20195.www2.hpe.com/v2/Getdocument.aspx?docname=5981-9356enw

Provides for the installation of your HPE hardware according to product specifications including options. The HPE service delivery technician will connect the product to a LAN as appropriate and enable remote support to allow for automatic case creation for hardware failures. Installation and start up services also includes the installation of one supported operating system type (Windows® or Linux).

HPE Datacenter Care helps improve IT stability and security, increase the value of IT, and enable agility and innovation. It is a structured framework of repeatable, tested, and globally available services “building blocks.” You can deploy, operate, and evolve your datacenter wherever you are on your IT journey. With HPE Datacenter Care, you benefit from a personalized relationship with HPE via a single point of accountability for HPE and others’ products. For more information, visit:

http://www.hpe.com/services/datacentercare

With HPE GreenLake Flex Capacity, you get the speed, scalability, and economics of the public cloud in the privacy of your data center. Gain the advantages of the public cloud—consumption-based payment, rapid scalability without worrying about capacity constraints. Reduce the “heavy lifting” needed to operate a data center. And retain the advantages that IT provides the business (i.e., control, security). Deliver the right user experience, choose the right technology for the business, manage privacy and compliance, and manage the cost of IT. And, you have the option to use the public cloud when needed.

Datacenter Care for Hyperscale is available for Service Providers and HPC customers who use a scale out approach to computing with a high volume homogenous infrastructure and resilient architecture can take advantage of this environment support tailored to their operating model.

HPE Factory Express offers configuration, customization, integration and deployment services for HPE servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HPE products supported through Factory Express include a wide array of servers and storage: HPE Integrity, HPE ProLiant, HPE Apollo, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000 servers as well as the MSAxxxx3PAR suite, XP, rackable tape libraries and configurable network switches.

HPE Service Credits offers flexible services and technical skills to meet your changing IT demands. With a menu of service that is tailored to suit your needs, you get additional resources and specialist skills to help you maintain peak performance of your IT. Offered as annual credits, you can plan your budgets while proactively responding to your dynamic business.

Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book on a class today and learn how to get the most from your technology investment. http://www.hpe.com/ww/learn

The HPE Support Center is a personalized online support portal with access to information, tools and experts to support HPE business products. Submit support cases online, chat with Hewlett Packard Enterprise experts, access support resources or collaborate with peers.Learn more http://www.hpe.com/support/hpesc.

The HPE Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime.

HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE warranty, HPE Support Service or HPE contractual support agreement.

Notes:

­  *HPE Support Center Mobile App is subject to local availability.

­  For more information: http://www.hpe.com/services.

­  HPE ProLiant DL380 Gen10 Server is covered under the HPE Service Contract applied to the HPE ProLiant Server. No separate HPE support services need to be purchased.

Warranty and Support Services will extend to include HPE options configured with your server or storage device. The price of support service is not impacted by configuration details. HPE sourced options that are compatible with your product will be covered under your server support at the same level of coverage allowing you to upgrade freely. Installation for HPE options is available as needed. To keep support costs low for everyone, some high value options will require additional support. Additional support is only required on select high value workload accelerators, fibre switches, InfiniBand and UPS batteries over 12KVA. See the specific high value options that require additional support here.

Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.

Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer’s operating manual, product QuickSpecs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by Hewlett Packard Enterprise due to malfunction.

P20182-291

P20172-291

P20174-291

NC 8LFF 500W PS Server

(1x 16 GB)

Notes: Runs at 2133MT/s due to processor limitation

(1x 32 GB)

Notes: Runs at 2400MT/s due to processor limitation

(1x 32GB)

Notes: Runs at 2400MT/s due to processor limitation

stand-up card

Notes: No embedded networking

stand-up card

Notes: No embedded networking

stand-up card

Notes: No embedded networking

­  Network Choice (NC) models do not include an embedded NIC. A pre-selected FlexibleLOM is included in the configuration with additional options available via stand-up card NIC adapters listed in the “HPE Networking” section.

­  UEFI is the standard default for all SMB models.

Country Code Key

· -B21 = Worldwide (excl. Japan and PRC)

· -291 = Japan

SMB Models

· New SMB focused offers regionally released as “Smart Buy Express” in the U.S. and Canada, “Top Value” in Europe, and “Intelligent Buy” in Asia Pacific and Japan”.

· SMB Models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.

· Hewlett Packard Enterprise does not provide factory integration of options into SMB Models. Any additional options purchased will be shipped separately and would need to be field integrated.

· If you desire to custom configure an SMB Model please consult your preferred reseller.

P23465-291

P24840-291

P24841-291

(1x 32 GB; P00924-B21)

Notes: Runs at 2400 MT/s due to processor limitation.

(1x 32 GB; P00924-B21)

Notes: Runs at 2400 MT/s due to processor limitation.

(1x 32 GB; P00924-B21)

Notes: Runs at 2400 MT/s due to processor limitation.

stand-up card

Notes: No embedded networking

stand-up card

Notes: No embedded networking

stand-up card

Notes: No embedded networking

Notes:

– 8-Port modular Smart Array.

– Smart Storage battery (P01366-B21) included.

Notes:

– 8-Port modular Smart Array.

– Smart Storage battery (P01366-B21) included.

Notes:

– 8-Port modular Smart Array.

– Smart Storage battery (P01366-B21) included.

­  Network Choice (NC) models do not include an embedded NIC. A pre-selected FlexibleLOM is included in the configuration with additional options available via stand-up card NIC adapters listed in the “HPE Networking” section.

­  UEFI is the standard default for all SMB models.

Country Code Key

· -B21 = Worldwide (excl. Japan and PRC)

· -291 = Japan

P24842-291

P24848-291 / P40425-291

(1x 32 GB; P00924-B21)

Notes: Runs at 2400 MT/s due to processor limitation.

(1x 32 GB; P00924-B21)

Notes: Runs at 2400 MT/s due to processor limitation.

stand-up card

Notes: No embedded networking

HPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter (727054-B21) plus optional stand-up card

Notes: No embedded networking

HPE Ethernet 10Gb 2-port FLR-SFP+ BCM57414 Adapter (P08440-B21) plus optional stand-up card

Notes: No embedded networking

Notes:

– 8-Port modular Smart Array.

– Smart Storage battery (P01366-B21) included.

­  Network Choice (NC) models do not include an embedded NIC. A pre-selected FlexibleLOM is included in the configuration with additional options available via stand-up card NIC adapters listed in the “HPE Networking” section.

­  UEFI is the standard default for all SMB models.

Country Code Key

· -B21 = Worldwide (excl. Japan and PRC)

· -291 = Japan

P36135-291

P24844-291

(1x 32 GB; P00924-B21)

Notes: Runs at 2666 MT/s due to processor limitation.

HPE Ethernet 10Gb 2-port FLR-T BCM57416 Adapter (817721-B21) plus optional

stand-up card

Notes: No embedded networking

HPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter (727054-B21) plus optional stand-up card

Notes: No embedded networking

­  Network Choice (NC) models do not include an embedded NIC. A pre-selected FlexibleLOM is included in the configuration with additional options available via stand-up card NIC adapters listed in the “HPE Networking” section.

­  UEFI is the standard default for all SMB models.

Country Code Key

· -B21 = Worldwide (excl. Japan and PRC)

· -291 = Japan

P24845-291/ P40422-291

P24846-291/ P40423-291

P24847-291/ P40424-291

(1x 32 GB; P00924-B21)

(1x 32 GB; P00924-B21)

(1x 32 GB; P00924-B21)

HPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter (727054-B21) plus optional stand-up card

Notes: No embedded networking

HPE Ethernet 10Gb 2-port FLR-SFP+ BCM57414 Adapter (P08440-B21) plus optional stand-up card

Notes: No embedded networking

­  Network Choice (NC) models do not include an embedded NIC. A pre-selected FlexibleLOM is included in the configuration with additional options available via stand-up card NIC adapters listed in the “HPE Networking” section.

­  UEFI is the standard default for all SMB models.

Country Code Key

· -B21 = Worldwide (excl. Japan and PRC)

· -291 = Japan

P24849-291/ P40426-291

P24850-291/ P40427-291

HPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter (727054-B21) plus optional stand-up card

Notes: No embedded networking

HPE Ethernet 10Gb 2-port FLR-SFP+ BCM57414 Adapter (P08440-B21) plus optional stand-up card

Notes: No embedded networking

­ Network Choice (NC) models do not include an embedded NIC. A pre-selected FlexibleLOM is included in the configuration with additional options available via stand-up card NIC adapters listed in the “HPE Networking” section.

­ UEFI is the standard default for all SMB models.

­ ¹Not supported with NVMe SSDs, nor 2SFF HDD kits (826687-B21; 826688-B21) installed in rear, nor GPUs, nor 4LFF mid-tray. Detailed configuration and facilities requirements can be found under “Intel Xeon Scalable Series 6250, 6250L, and 6256 Configuration and Facilities Requirements Matrix” with this document.

Country Code Key

· -B21 = Worldwide (excl. Japan and PRC)

· -291 = Japan

P20245-291/ P40428-291

P20248-291/ P39380-291

P20249-291

(1x 32 GB)

(1x 32 GB)

Notes: Runs at 2666 MT/s due to processor limitation.

(1x 32 GB)

Notes: Runs at 2666 MT/s due to processor limitation.

HPE Ethernet 10/25Gb 2-port FLR-SFP28 MCX4121A-ACFT Adapter (817749-B21) plus optional stand-up card

Notes: No embedded networking

HPE Ethernet 10/25Gb 2-port FLR-SFP28 MCX4121A-ACFT Adapter (817749-B21) plus optional stand-up card

Notes: No embedded networking

stand-up card

Notes: No embedded networking

HPE Ethernet 10/25Gb 2-port FLR-SFP28 BCM57414 Adapter (817709-B21) plus optional stand-up card

Notes: No embedded networking

HPE Ethernet 10/25Gb 2-port FLR-SFP28 BCM57414 Adapter (817709-B21) plus optional stand-up card

Notes: No embedded networking

Notes:

­  8-Port modular Smart Array.

­  Smart Storage battery included.

­  Network Choice (NC) models do not include an embedded NIC. A pre-selected FlexibleLOM is included in the configuration with additional options available via stand-up card NIC adapters listed in the “HPE Networking” section.

­  UEFI is the standard default for all SMB models.

Country Code Key

· -B21 = Worldwide (excl. Japan and PRC)

· -291 = Japan

· Factory Integrated Models must start with a CTO Server.

· FIO indicates that this option is only available as a factory installable option.

· All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.

· Some options may not be integrated at the factory. Contact your local sales representative for additional information.

The below (4) CTO server models denoted with “NC” in the SKU description, provide flexibility in the networking choice and require a FlexibleLOM Adapter or a validated alternative from the “HPE Networking” section be selected.

Notes:

­  Network Choice (NC) server models require a networking selection of a FlexibleLOM from the options listed in the “FlexibleLOM Adapter” section or select network adapters in the “HPE Networking” section.

­  HPE Trusted Supply Chain (P36394-B21) is an optional security upgrade intended for agencies and regulated industries needing enhanced security and compliance needs. Applying this option to a DL380 Gen10 CTO server ensures it is built in the USA in a secured facility by vetted HPE personnel assigned to the manufacturing processes. A multitude of checkpoints/inspections for malicious microcode and counterfeit parts are performed throughout the server build, and additional safeguards are put in place against cyber-exploits throughout the server lifecycle. The HPE ProLiant DL380 Gen10 server is re-branded as a HPE ProLiant DL380T Gen10 to denote the HPE Trusted Supply Chain security enhancements. The DL380T Gen10 is currently supported in the USA, exclusively, and is Trade Agreement Act (TAA) compliant. See “HPE Security” section within this document for more detail and learn more at http://www.hpe.com/security

­  HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal Government customers. These products are either manufactured or substantially transformed in a designated country. TAA compliance is only provided when HPE options are included as part of factory integrated orders (CTO).

­  To select a TAA model from the above, first select a Networking Choice CTO server model, then add the TAA Instruction SKU (P19713-B21).

­  The HPE ProLiant DL380 Gen10 12 LFF CTO Server ships with the cable required for the P816i-a installation.

­  All CTO servers are Energy Star 3.0 compliant.

Notes:

­ HPE Trusted Supply Chain (P36394-B21) is an optional security upgrade intended for agencies and regulated industries needing enhanced security and compliance needs. Applying this option to a DL380 Gen10 CTO server ensures it is built in the USA in a secured facility by vetted HPE personnel assigned to the manufacturing processes. A multitude of checkpoints/inspections for malicious microcode and counterfeit parts are performed throughout the server build with additional safeguards in place against cyber-exploits throughout the server lifecycle. The HPE ProLiant DL380 Gen10 server is re-branded as a HPE ProLiant DL380T Gen10 Server to denote the HPE Trusted Supply Chain security enhancements. The DL380T Gen10 is currently supported in the USA, exclusively, and is Trade Agreement Act (TAA) compliant. See “HPE Security” section within this document for more detail and learn more at http://www.hpe.com/security

­ HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal Government customers. These products are either manufactured or substantially transformed in a designated country. TAA compliance is only provided when HPE options are included as part of factory integrated orders (CTO).

­ To select a TAA model from the above, first select an Embedded LOM CTO server model, then add the TAA Instruction SKU (P19713-B21)

­  The HPE ProLiant DL380 Gen10 12 LFF CTO Server ships with the cable required for the P816i-a installation.

­ All CTO servers are Energy Star 3.0 compliant.

Notes:

­  This applies to CTO configurations; field upgrades may differ depending on field configuration.

­  3x 8 NVMe option on SFF will only allow for partial population of Box1 to max 20 NVMe.

Please select one –L21 processor required below.

For second processor, please select the same processor model with –B21 from Core Options – HPE Processors section.

For example: first processor, select 874752-L21 then for second processor, select 874752-B21.

Notes:

­  8SFF CTO 1P models ship with 4 standard fans. The second processor option kit contains 2 additional fans. 12 LFF and 24 SFF CTO Servers ship with 6 High performance fans included; 8LFF CTO Servers ship with 6 Standard fans included. High performance fan kit is available to meet ambient temperature environments and are required for rear drives or NVMe configurations.

­  Maximum memory capacity per processor is dependent on processor models. All processors support up to 768 GB max memory per processor except “M” model processors will support up to 1.5 TB max memory per processor.

­  Mixing of 2 different processor models are NOT allowed.

­  DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

­  Processors with 130W or higher will ship with the High Performance heat sink plus SKUs 8156, 6128, 5122 as noted below. All other will processors will ship with the Standard heat sink.

Processor Option Kits (Required Processor)

2^nd Generation Intel Xeon-Platinum

Notes:

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

­  All the below models ships with Performance Heatsink.

­  Supports “Core boosting” Learn more http://www.hpe.com/info/ist.

­  To enable this feature an iLO Advanced, or iLO Advanced Premium Security Edition License is required.

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

­  All the below models ship with Performance Heatsink.

­  Requires high performance fan kit (867810-B21), unless 24SFF or 12LFF server models are selected, which provide high performance fans as the default.

­  Not supported with NVMe SSDs, nor 2SFF HDD kits (826687-B21; 826688-B21) installed in rear, nor GPUs, nor 4LFF mid-tray. Detailed configuration and facilities requirements can be found under “Intel Xeon Scalable Series 6250, 6250L, and 6256 Configuration and Facilities Requirements Matrix” with this document.

­  Requires high performance fan kit (867810-B21), unless 24SFF or 12LFF server models are selected, which provide high performance fans as the default.

­ Not supported with NVMe SSDs, nor 2SFF HDD kits (826687-B21; 826688-B21) installed in rear, nor GPUs, nor 4LFF mid-tray. Detailed configuration and facilities requirements can be found under “Intel Xeon Scalable Series 6250, 6250L, and 6256 Configuration and Facilities Requirements Matrix” with this document.

­  Requires high performance fan kit (867810-B21), unless 24SFF or 12LFF server models are selected, which provide high performance fans as the default.

­  Not supported with NVMe SSDs, nor 2SFF HDD kits (826687-B21; 826688-B21) installed in rear, nor GPUs, nor 4LFF mid-tray. Detailed configuration and facilities requirements can be found under “Intel Xeon Scalable Series 6250, 6250L, and 6256 Configuration and Facilities Requirements Matrix” with this document.

­  2-processor configurations NOT supported with this processor; secondary and tertiary risers not supported

­  Do not ship with Performance Heatsink.

­  5218B has consistent features with the 5218 processor but from a different die. Mixing both 5218B & 5218 in a system is not supported

­  Do not ship with Performance Heatsink.

­  Supports “Core boosting” Learn more http://www.hpe.com/info/ist.

­  To enable this feature an iLO Advanced, or iLO Advanced Premium Security edition License are required.

­  High frequency bin targeting FSI workloads. Configuration restrictions will apply, support on 8SFF only.

­  The system inlet ambient temperature is restricted at 22C.

­  NVMe drives CANNOT be ordered with this Processor.

­  HPE DL38X Gen10 High Performance Temperature Fan Kit (867810-B21) to be selected.

­  No rear drives are supported with this processor.

­  No Graphic cards (GPUs) are available with this processor selection.

­  For additional details on this processor please visit: https://h20195.www2.hpe.com/v2/Getdocument.aspx?docname=a00039606enw

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

­  All the below models do not ship with Performance Heatsink unless otherwise noted

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

­  All the below models do not ship with Performance Heatsink.

Please select one or more memory from below.

For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to:

https://www.hpe.com/docs/memory-population-rules

For Gen10 memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table

For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance and legacy mirrored memory feature etc. please go to: http://www.hpe.com/docs/memory-ras-feature

Notes:

­  The maximum memory speed and capacity is a function of the memory type, memory configuration, and processor model.

­  DDR4-2933 Memory Kits are only supported with 2nd Generation Intel Xeon Scalable Series Processors and DDR4-2666 Memory Kits are only supported with 1st Generation Intel Xeon Scalable Series Processors.

­  A maximum of 12 Intel Optane Persistent Memory for HPE supported with select 2nd Generation Intel Xeon Scalable Series Processors ONLY (82xx/62xx/52xx/4215R/4215) and can only be mixed with either RDIMMs or LRDIMMs.

­  For configurations exceeding 1TB/socket, the “M” series (2TB/socket) or “L” series processors (4.5TB/socket) are required.

­  For information regarding Intel Optane Persistent Memory for HPE visit: http://www.hpe.com/info/persistentmemory

­  A maximum of 12 HPE NVDIMMs supported.

­  Can only be mixed with RDIMMs.

­  For General Server Memory and HPE NVDIMM Population Rules and Guidelines for Gen10 see details here:

http://www.hpe.com/docs/memory-population-rules

­  For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/memory-speed-table

­  To realize the performance memory capabilities listed in this document, HPE DDR4 SmartMemory is required.

­  For additional information, please see the HPE DDR4 SmartMemory QuickSpecs.

Select one or two power supplies from below.

Notes: Mixing of 2 different power supplies is NOT allowed.

One of the following from each list may be selected if desired at time of factory integration

­  Replaces iLO default randomized password by an HPE defined common password. HPE highly recommends changing this password immediately after the initial onboarding process.

­  Customers who want to choose their own custom iLO default password should use the HPE Factory Express Integration Services

­  HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants.

­  HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.

­  This is a factory integrated only option.

­  This will connect 2 SFF cage installed in the front of the chassis to NVMe.

­  This is a factory integrated only option.

­  Indicates the cage will also have an NVMe connection.

­  This is a factory integrated only option.

­  Will remove the Primary 8SFF cage in Box 3 of the 8SFF and replace with a Box blank.

­  This is a factory integrated only option.

­  Will remove the Primary shipping PCIe riser.

· 3, 6, 8 or 16 node vSAN Clusters (3 node minimum)

· HW is optimized for vSAN

· VMware vSAN Advanced LTU bundled

Notes: Software Requirements: VMware vSphere 6.7 Update 1, VMware vSphere with Operations Management™ 6.1 (any edition), VMware vCloud Suite 6.0 (any edition updated with 6.5) or VMware vCenter Server 6.7 Update 1.

Notes: The http://www.hpe.com/info/CablingMatrixGen10 can help to explain the cable routing for each option:

­  This option provides support for up to 8 NVMe drives, and can only be populated in Box 1, Box 2 and Box 3 of the SFF chassis, note Box 1 can only be partially populated with four drives if Box 2 and Box 3 are fully populated with NVMe drives.

­  The HPE DL380 Gen10 High Performance fan kit is required for NVMe support (867810-B21).

­  The HPE DL38X Gen10 4-port 8 NVMe SlimSAS Riser (867807-B21) is required to support this.

­  There are limitations on GPU support with the NVMe bay installed.

­  The HPE DL380 Gen10 Universal Media bay provides front Display Port and 2xUSB 2.0; plus support for 2x SFF front drives or 2 NVME front drives (826687-B21, riser required) and ODD support (Not included); and can only be located in Box1 in either an 8 SFF or 8+8 SFF model.

­  This is a SFF model option only.

­  This kit can be supported in Box 1, 2 or 3 and provides support for up to 6 SAS/SATA + 2 NVMe or 8 SFF SAS/SATA drives per Box. If only populating SFF SAS/SATA, the HPE DL38X Gen10 SFF Box1/2 Cage/Backplane Kit (826691-B21) is the more appropriate option.

­  With NVMe drives a specific riser is required.

­  When adding to Box 1 the addition of the High Performance Fan kit (867810-B21) is required.

­  Required for GPU installations.

­  Processor kits above 130W include a High Performance Heatsink, along with the 8156, 6128 and 5122.

­  This kit contains 2 High Performance Heatsinks.

­  This kit is required for specific Ambient temperature environments

­  This kit is also required to support GPUs configurations.

­  This is required for NVMe configurations.

­  This kit provides maximum cooling for your Server.

­  This kit is required when Box 1, 2 and 3 are populated.

­  2 SFF in the rear is only supported with a 24 SFF model or 12 LFF model.

­  In the rear this leaves 1×16 slot accessible.

­  Rear drives require the addition of the High Performance Fan kit (867810-B21).

­  Supports UFF SCM drives.

­  HPE DL38X Gen10 Universal Media Bay Kit (826708-B21).

­  NVMe drives require the addition of the High Performance Fan kit (867810-B21).

­  NVMe drives require the addition of an NVMe capable riser.

­  Drive cage can be used in the rear of the chassis, but will not support NVMe drives rear.

­  Supports UFF SCM drives.

­  Supports 2 NVMe in the Universal Media bay (included) on the 8 LFF model.

­  For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8 1-port 2 NVMe SlimSAS Riser (867806-B21); or the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser  (867808-B21).

­  NVMe drives require the addition of the High Performance Fan kit (867810-B21).

­  Systems Insight Display does not ship standard but is available as a Factory Integrated or field upgrade option.

­  Primary population in slot 3 of the primary riser.

Processor Option Kits

2^nd Generation Intel Xeon-Platinum

Notes:

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

­  All the below models ship with Performance Heatsink unless otherwise noted.

­  Supports “Core boosting” Learn more http://www.hpe.com/info/ist.

­  To enable this feature an iLO Advanced, or iLO Advanced Premium Security edition License are required.

Notes:

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

­  All the below models ship with Performance Heatsink unless otherwise noted.

­  Requires high performance fan kit (867810-B21), unless 24SFF or 12LFF server models are selected, which provide high performance fans as the default.

­  Not supported with NVMe SSDs, nor 2SFF HDD kits (826687-B21; 826688-B21) installed in rear, nor GPUs, nor 4LFF mid-tray. Detailed configuration and facilities requirements can be found under “Intel Xeon Scalable Series 6250, 6250L, and 6256 Configuration and Facilities Requirements Matrix” with this document.

­  Requires high performance fan kit (867810-B21), unless 24SFF or 12LFF server models are selected, which provide high performance fans as the default.

­  Not supported with NVMe SSDs, nor 2SFF HDD kits (826687-B21; 826688-B21) installed in rear, nor GPUs, nor 4LFF mid-tray. Detailed configuration and facilities requirements can be found under “Intel Xeon Scalable Series 6250, 6250L, and 6256 Configuration and Facilities Requirements Matrix” with this document.

­  Requires high performance fan kit (867810-B21), unless 24SFF or 12LFF server models are selected, which provide high performance fans as the default.

­  Not supported with NVMe SSDs, nor 2SFF HDD kits (826687-B21; 826688-B21) installed in rear, nor GPUs, nor 4LFF mid-tray. Detailed configuration and facilities requirements can be found under “Intel Xeon Scalable Series 6250, 6250L, and 6256 Configuration and Facilities Requirements Matrix” with this document.

­  2-processor configurations not supported with this processor; secondary and tertiary risers not supported

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported. This standalone option kit is intended to upgrade a system originally installed with a 2^nd generation Intel Xeon Scalable Series processor.

­  2-processor configurations NOT supported with this processor; secondary and tertiary risers not supported

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported. This standalone option kit is intended to upgrade a system originally installed with a 2^nd generation Intel Xeon Scalable Series processor.

­  2-processor configurations NOT supported with this processor; secondary and tertiary risers not supported

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported. This standalone option kit is intended to upgrade a system originally installed with a 2^nd generation Intel Xeon Scalable Series processor.

­  Do not ship with Performance Heatsink.

­  2-processor configurations NOT supported with this processor; secondary and tertiary risers not supported

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported. This standalone option kit is intended to upgrade a system originally installed with a 2^nd generation Intel Xeon Scalable Series processor.

­  5218B has consistent features with the 5218 processor but from a different die. Mixing both 5218B & 5218 in a system is not supported

­  Do not ship with Performance Heatsink.

­  Supports “Core boosting” Learn more http://www.hpe.com/info/ist.

­  To enable this feature an iLO Advanced, or iLO Advanced Premium Security Edition License are required.

­  High frequency bin targeting FSI workloads. Configuration restrictions will apply, support on 8SFF only.

­  The system inlet ambient temperature is restricted at 22C.

­  NVMe drives CANNOT be ordered with this Processor.

­  Requires HPE DL38X Gen10 High Performance Temperature Fan Kit (867810-B21) be selected.

­  No rear drives are supported with this processor.

­  No Graphic cards (GPUs) are available with this processor selection.

­  For additional details on this processor please visit:

https://h20195.www2.hpe.com/v2/Getdocument.aspx?docname=a00039606enw

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

­  All the below models do not ship with Performance Heatsink unless otherwise noted

­  Field upgrades from 1^st generation processors (x1xx) to 2^nd generation processors (x2xx) not supported.

­  All the below models do not ship with Performance Heatsink.

­  Up to two processors supported.

­  HT indicates that the processor model supports Intel® Hyper-Threading Technology.

­  Turbo2: Intel® Turbo Boost Technology 2.0 provides more computing power when you need it with performance that adapts to spikes in your workload and delivers more performance upside than previous generation turbo technology.

­  DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

­  The xxxxxx-L21 is the first processor shipped, the xxxxxx-B21 is the 2nd processor and ships with 2 additional fans for factory of field installation.

­  Maximum memory per socket depends on the processor selected.

­  Processors above 130W use a High Performance Heatsink, along with the 8256, 8156, 6128, 5222, and 5122.

To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability, HPE recommends memory from the list located here: http://www.hpe.com/products/recommend.

Best product availability is limited to US, Canada, and Latin America at this time.

Notes:

­  Maximum memory capacity and speed per processor is dependent on processor model selection or limitation.

­  DDR4-2933 Memory Kits are only supported with 2nd Generation Intel Xeon Scalable Series Processors and DDR4-2666 Memory Kits are only supported with 1^st Generation Intel Xeon Scalable Series Processors.

Registered DIMMs (RDIMMs)

­  Memory DIMM availability with a server platform is dependent upon completion of certification testing.

­  The maximum memory speed is a function of the memory type, memory configuration, and processor model.

­  Mixing of RDIMM and LRDIMM is not supported.

­  For configurations exceeding 1TB/socket, the “M” series (2TB/socket) or “L” series processors (4.5TB/socket) are required.

­  A maximum of 12 Intel Optane Persistent Memory for HPE supported with select 2nd Generation Intel Xeon Scalable Series Processors ONLY (82xx/62xx/52xx/4215R/4215) and can only be mixed with either RDIMMs or LRDIMMs.

­  For configurations exceeding 1TB/socket, the “M” series (2TB/socket) or “L” series processors (4.5TB/socket) are required.

­ For information regarding Intel Optane Persistent Memory for HPE visit: http://www.hpe.com/info/persistentmemory

­  A maximum of 12 HPE NVDIMMs supported with 1^st Generation Intel Xeon Scalable Processors and can only be mixed with RDIMMs.

­  Can only be mixed with RDIMMs.

­  For General Server Memory and HPE NVDIMM Population Rules and Guidelines for Gen10 see details here:

http://www.hpe.com/docs/memory-population-rules

­  The HPE DL380 Gen10 Universal Media bay provides front Display Port and 2xUSB 2.0; plus support for 2x SFF front drives or 2 NVME front drives (826687-B21, riser required) and ODD support (Not included); and can only be located in Box1 in either an 8 SFF or 8+8 SFF model.

­  This is a SFF model option only.

For SSD selection guidance, please visit https://ssd.hpe.com/

­  M.2 drives supported in the Primary Riser and use S100i SATA controller only.

­  M.2 supports Software RAID only.

­  A NVME (826689-B21 or 873781-B21) or Premium (826690-B21) drive cage is required to support these drives in conjunction with a NVMe riser kit.

­  HPE has qualified the NVMe drive portfolio using the Operating System inbox drivers, full detail on the

HPE Solid State Drive QuickSpecs.

­  NVMe drives not supported by HPE Smart Array controllers.

­  NVMe drives require the addition of the High Performance Fan kit (867810-B21).

­  This is supported in the LFF model only.

­  3 LFF rear drives will consume the 2nd riser expansion slot.

­  Supported with both the 8 LFF and 12 LFF models.

­  Ships with low-profile heatsink for installation. Supporting processors below 125W. Additional processors supported with system inlet ambient temperature limitations. See “CPUs Supported with 4LFF mid-tray” below

­  With this mid-tray only single-wide (8.5-inch cards with connections or less) cards are supported.

­  This drive does support hot-swap drives.

­  This requires High Performance Fans (867810-B21).

­  HPE DL38X Gen10 Universal Media Bay Kit (826708-B21).

­  NVMe drives require the addition of the High Performance Fan kit (867810-B21).

­  NVMe drives require the addition of an NVMe capable riser.

­  Drive cage can be used in the rear of the chassis, but will not support NVMe drives rear.

­  Supports 2 SFF rear in Riser1 or 2 location – max 2 supported SFF model.

­  Supports 2 SFF rear in Riser1 or 2 location in LFF model. Note is 3 LFF rear option is selected maximum of one in riser 1 location.

­  Supports uFF drives.

­  This option provides support for up to 8NVMe drives, and can be populated in all Boxes in the 8 SFF model.

­  A maximum of 20 NVMe drives are supported; this will mean partial population (4 drives) when the 3^rd cage is populated in Box 1.

­  This will require the HPE DL38X Gen10 4-port 8 NVMe SlimSAS Riser (867807-B21).

­  NVMe drives require the addition of the High Performance Fan kit (867810-B21).

­  This kit can be supported in Box 1, 2 or 3 and provides support for up to 6 SAS/SATA + 2 NVMe or 8 SFF SAS/SATA drives per Box. If only populating SFF SAS/SATA, the HPE DL38X Gen10 SFF Box1/2 Cage/Backplane Kit (826691-B21) is the more appropriate option.

­  With NVMe drives a specific riser is required.

­  NVMe drives require the addition of the High Performance Fan kit (867810-B21).

­  Supports 2 NVMe in the Universal Media bay (included) on the 8 LFF model.

­  For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8 1-port 2 NVMe SlimSAS Riser (867806-B21); or the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser (867808-B21).

­  NVMe drives require the addition of the High Performance Fan kit (867810-B21).

The DL380 Gen10 NC CTO chassis does not come with embedded networking, hence the requirement to configure with either a FlexibleLOM or select PCIe networking adapter.

­  The DL380 Gen10 embedded LOM chassis ships standard with 4x 1 Gb embedded

­  A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.

­  Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:

https://www.hpe.com/us/en/product-catalog/servers/adapters/pip.models.hpe-storefabric-converged-network-adapters.4118472.html

­ This option requires the selection of Pensando DSP 10/25G 2p SFP28 Card (P26966-B21).

­ Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configure-to-Order (CTO) chassis. To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected.

­ This option cannot be selected with any GPU

­  The DL380 Gen10 Embedded LOM Configure-to-Order (CTO) chassis ships with 4x 1Gb embedded.

­  When configuring a DL380 Gen10 Networking Choice (NC) Configure-to-Order (CTO) chassis, a FlexibleLOM adapter or select stand-up card networking adapter in the “HPE Networking” section must be selected.

­  Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped.

­  Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:

https://www.hpe.com/us/en/product-catalog/servers/adapters/pip.models.hpe-storefabric-converged-network-adapters.4118472.html

­ Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configure-to-Order (CTO) chassis. To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected.

­ DSC card must be installed in slot 1 when configured with Pensando for HPE iLO Adaptive LOM module (P26969-B21)

­ Each card instance requires one RTU license of Silver or Platinum software. In case of more than one adapter, RTU licenses do not need to be of the same part number.

­ One 3yr/4yr/5yr Silver or 3yr/4yr/5yr Platinum software license must be purchased for every DSC-25 card/adapter in a server.

­ 1yr Silver, 1yr Platinum software licenses are reserved for renewals only.

­ This option requires the selection of Pensando DSP 10/25G 2p SFP28 Card (P26966-B21).

­ Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configure-to-Order (CTO) chassis. To continue with the combined selection of this networking option and Legacy FIO Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy FIO mode restriction must be selected

­ This option cannot be selected with any GPU; If a GPU is required, contact your field services representative to have the configuration evaluated.

­  The Primary Riser shipping default in the chassis is a x8 FH, FL, x16 FH, FL and x8 FH, HL with m.2 support.

­  For a Secondary/Tertiary riser, the second processor is required.

­  Slot 1 (Top slot) and 2 (Middle slot) available in Primary riser location

­  Replaces the default Primary riser

­  Max Qty=1 Double-wide Accelerator/GPU can be populated

­  Supports Full Height and Full length cards.

­  Bus width x16, x16, Connector Width x16, x16.

­  Slot 2 (Middle slot) and Slot 3 (Bottom slot) available in Primary riser location

­  Replaces the default Primary riser

­  Max Qty=1 Double-wide Accelerator/GPU can be populated

­  Supports Full Height and Full length cards.

­  Bus width x16, x16, Connector Width x16, x16.

­  Slot 1 (Top slot) and 2 (Middle Slot) and 3 (Bottom slot) available in Secondary riser location with support for 2 NVMe drives

­  Supports Full Height and half-length cards.

­  Bus width x8, x8, x8 Connector Width x8, x8, x8.

­  If this option is selected and  the Premium 2SFF HDD Kit (826687-B21) has also been ordered, then the 2SFF NVMe Instruction Spec (878189-B21) MUST be selected; does not apply to 8LFF server model

­ If this option is selected and HPE DL38X Gen10 Premium 6SFF SAS/SATA + 2SFF NVMe Bay Kit (826690-B21) has also been ordered, then the 6+2 NVMe Instruction Spec (878192-B21) MUST be selected.

­  Slot 1 (Top slot) and 2 (Middle Slot) and 3 (Bottom slot) available in Primary riser location and must be populated. Supports up to (3) full-height, half-length, single-width GPU/Accelerators (depending on model)

­  Replaces the default Primary riser

­  Bus width x8, x16, x8; Connector width x16, x16, x16

­  This is a factory-integrated only (FIO) option. All slots (3) must be populated.

­  HPE DL38X Gen10 x16/x16/x16 Secondary GPU FIO Riser Kit must also be selected and requires all slots (3) be populated.

­  Slot 1 (Top slot) and 2 (Middle Slot) and 3 (Bottom slot) available in Secondary riser location; all slots must be populated. Supports up to (3) full-height, half-length, single-width GPU/Accelerators (depending on model)

­  Bus width x8, x16, x8; Connector width x16, x16, x16

­  This is a factory-integrated only (FIO) option. All slots (3) must be populated.

­  Slot 1 (Top slot) and 2 (Middle slot) available in Secondary riser location.

­  NMax Qty=1 Double-wide Accelerator/GPU can be populated

­  Supports Full Height and Full length cards.

­  Bus width x16, x16, Connector Width x16, x16.

­  Slot 1 (Top slot) and 2 (Middle slot) and 3 (Bottom slot) available in Secondary riser location.

­  No M.2 support on this riser.

­  Supports Full Height, Half- length cards; Full Height, Full-length cards and Full Height, Half- length cards.

­  Bus width x8, x16, x8, Connector Width x8, x16, x8.

­  Riser supporting up to 8 NVMe drives in Primary location. All PCIe lanes dedicated to NVMe; no additional slots available for expansion via stand-up cards in the Primary riser location.

­  Replaces the default Primary riser

­  This is a factory integrated only option.

­  This can be connected to an 8SFF NVMe drive cage in box 3.

­  To achieve max 20 NVMe support, connect 4 NVMe drives to the tertiary riser.

­  Slot 2 (Middle slot) and 3 (Bottom slot) available in Secondary riser location.

­  Max Qty=1 Double-wide Accelerator/GPU can be populated

­  Supports Full Height and Full length cards.

­  Bus width x16, x16, Connector Width x16, x16.

­  For additional details on ProLiant DL Gen10 server risers please visit:

https://www.hpe.com/h20195/v2/Getdocument.aspx?docname=a00043229enw

­  Premium bay supporting SFF SAS/SATA; can be configured in Primary or Secondary riser location

­  Slot  3 (Bottom slot) available in Primary or Secondary Riser location, depending on configuration

­  Bus width x16, Connector width x16

­  Slot 1 (Top slot) or 2 (Middle Slot) or 3 (Bottom slot) available in Secondary riser location with support for 2 NVMe drives

­  Supports Full Height and half-length cards.

­  Bus width x8, x8, x8 Connector Width x8, x8, x8.

­  If this option is selected and  the Premium 2SFF HDD Kit (826687-B21) has also been ordered, then the 2SFF NVMe Instruction Spec (878189-B21) MUST be selected; does not apply to 8LFF server model

­  If this option is selected and HPE DL38X Gen10 Premium 6SFF SAS/SATA + 2SFF NVMe Bay Kit (826690-B21) has also been ordered, then the 6+2 NVMe Instruction Spec (878192-B21) MUST be selected.

­  Slot 1 (Top slot) and slot (2) available in Tertiary riser location.

­  Bus width x8, x8; Connector Width x8, x8.

­  Slot 1 (Top slot) available in Tertiary riser location.

­  Supports Full Height and full-length card.

­  Bus width x16; Connector Width x16.

Notes:

­  This riser cage removes the retainer clip for proper fitment of certain NVIDIA GPUs in the primary and/or secondary riser. For such applicable NVIDIA GPUs to be populated in the primary riser, first select the appropriate primary riser unless the default x8x16x8 primary is preferred. Then add P38515-B21. For such applicable NVIDIA GPUs in the secondary riser, a secondary riser must first be selected; then add P38515-B21. See “Riser Information” table within this document to select the appropriate primary and/or secondary riser options.

­  If an applicable NVIDIA GPU is installed in both primary and secondary risers, a minimum quantity of (2) of P38515-B21 must be selected if the tertiary riser will not be populated; OR (1) P38515-B21 + (1) P38517-B21 HPE DL380 Gen10 Tertiary Riser without Retainer must be selected if, in addition to both primary and secondary risers containing applicable NVIDIA GPUs, the tertiary riser is being populated with any option, including NVIDIA GPUs.

Notes:

­  This tertiary riser cage is a butterfly cage for both the secondary riser and tertiary riser. It removes the retainer clip in the secondary riser for proper fitment of certain NVIDIA GPUs, while allowing for a tertiary riser selection as well. This option should be selected if the tertiary riser is being populated with any option, including NVIDIA GPUs, and the secondary riser contains an applicable NVIDIA GPU. First select the appropriate secondary riser and tertiary riser (see “Riser Information” table for riser options); then add P38517-B21.

Notes:

­  ¹ P14374-B21 and P14373-B21 each support up to (3) full-height, half-length, single-width Accelerators/GPUs (depending on Accelerator model selected), totaling (6) Accelerators in the primary riser and seconday riser (balanced across both processors in a 2-processor configuration). Connector width = x16/x16/x16; Bus width = x8/x16/x8.

­  D = Default on chassis; O = Optional; N = not supported or slot/connector not present.

­  The 826687-B21 premium 2SFF cage is leveraged both UMB, plus 2SFF rear over PS.

­  *For additional details on ProLiant DL Gen10 server risers please visit: https://www.hpe.com/h20195/v2/Getdocument.aspx?docname=a00043229enw

­ Flex Slot -48VDC power supplies support power efficiency of up to 94%.

­ Requires selection of HPE 1600W DC PSU Power Cable Kit (P22173-B21) or HPE 1600W DC PSU Power Lug Option Kit (P36877-B21). P22173-B21 includes the power cable with lugs installed while P36877-B21 is intended for customers using their own cabling and only require the lugs.

­ Not supported with Intel Optane Persistent Memory (128/256/512GB)

SFF

LFF

SFF +8NVMe

SFF

SFF

+SFF rear

LFF

LFF+

2SFF rear