Synology FlashStation FS3600

Gọi để biết giá (giá chưa bao gồm VAT)

Thiết bị lưu trữ NAS Synology FS3600 is a 24-bay all-flash Synology NAS for enterprise. – CPU: Intel® Xeon® D-1567 12-core 2.1 GHz. – Memory: 16 GB DDR4 ECC RDIMM, up to 128 GB. – Scalability: Up to 72 x SAS/SATA drives. – PCIe expansion: High-performance NIC support.

Hãng sản xuất: Synology
Tình trạng: Đặt hàng 02-03 tuần
Bảo hành: 60 tháng chính hãng

Mua hàng

CPU

CPU ModelIntel Xeon D-1567
CPU Quantity1
CPU Architecture64-bit
CPU Frequency12-core 2.1 (base) / 2.7 (turbo) GHz
Hardware Encryption Engine (AES-NI)

Memory

System Memory16 GB DDR4 ECC RDIMM
Memory Module Pre-installed16 GB (16 GB x 1)
Total Memory Slots4
Maximum Memory Capacity128 GB (32 GB x 4)
Notes
  • For more information on memory upgrade limitations, visit here.
  • Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
  • For more information on the recommended memory configurations, visit here.
  • Synology reserves the right to replace memory modules with the same or higher frequency based on supplier’s product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.

Storage

Drive Bays24
Maximum Drive Bays with Expansion Unit48 (RX1217sas x 2) / 72 (FX2421* x 2)
Compatible Drive Type* (See all supported drives)
  • 2.5″ SAS HDD
  • 2.5″ SAS SSD
  • 2.5″ SATA SSD
Maximum Single Volume Size*
  • 200 TB (32 GB RAM required, for RAID 5 or RAID 6 groups only)
  • 108 TB
Hot Swappable Drive
Notes
  • “Compatible drive type” indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
  • Each internal volume (may consist of multiple drives) is expandable up to 108 TB (with memory less than 32 GB) or 200 TB (with memory equal to or greater than 32 GB).

External Ports

RJ-45 1GbE LAN Port4 (with Link Aggregation / Failover support)
RJ-45 10GbE LAN Port2 (with Link Aggregation / Failover support)
USB 3.2 Gen 1 Port*2
Expansion Port1
NotesThe USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.

PCIe

PCIe Expansion1 x Gen3 x8 slot (x8 link)

File System

Internal Drives
  • Btrfs
  • EXT4
External Drives
  • Btrfs
  • EXT4
  • EXT3
  • FAT
  • NTFS
  • HFS+
  • exFAT*
NotesexFAT Access is purchased separately in Package Center.

Appearance

Form Factor (RU)2U
Size (Height x Width x Depth)88 mm x 482 mm x 724 mm
Weight14.9 kg
Rack Installation Support*4-post 19″ rack (Synology Rail Kit – RKS1317)
NotesThe rail kit is sold separately

Others

System Fan80 mm x 80 mm x 4 pcs
Fan Speed Mode
  • Full-Speed Mode
  • Cool Mode
  • Quiet Mode
Easy Replacement System Fan
Power Recovery
Noise Level*57 dB(A)
Scheduled Power On / Off
Wake on LAN / WAN
Power Supply Unit / Adapter500 W
Redundant Power Supply
AC Input Power Voltage100 V to 240 V AC
Power Frequency50/60 Hz, Single Phase
Power Consumption*258.23 W (Access)
127.99 W (HDD Hibernation)
British Thermal Unit881.12 BTU/hr (Access)
436.72 BTU/hr (HDD Hibernation)
Notes
  • Power consumption is measured when it is fully loaded with HGST 1.8TB HUC101818CS4204 hard drive(s).
  • Noise Level Testing Environment: Fully loaded with Toshiba 600GB AL14SEB060N hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%

Temperature

Operating Temperature0°C to 35°C (32°F to 95°F)
Storage Temperature-20°C to 60°C (-5°F to 140°F)
Relative Humidity5% to 95% RH

Certification

  • FCC
  • CE
  • BSMI
  • EAC
  • CCC
  • VCCI
  • RCM

Warranty

5 Years
NotesThe warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)

Environment

RoHS Compliant

Packaging Content

  • Main Unit X 1
  • Accessory Pack X 1
  • AC Power Cord X 2
  • Quick Installation Guide X 1

Optional Accessories

Notes
  • It is required to use D4RD-2666-16G with identical memory modules of the same capacity and frequency. For more information, visit here.
  • Expansion Unit FX2421 can only be used with identical expansion units.